PEB20570FV3.1T Infineon Technologies, PEB20570FV3.1T Datasheet - Page 222

• Manufacturer Part Number: PEB20570FV3.1T
• Manufacturer: Infineon Technologies

Specifications of PEB20570FV3.1T

• Lead Free Status / Rohs Status: Not Compliant

PPOD
COLLD
CLASS
TE
EDGE
GEDGE
GEM
Data Sheet
1 =
Push-Pull / Open-Drain Configuration
0 =
1 =
Collision Detection
0 =
1 =
Priority Class Assignment
0 =
1 =
Transmit Enable
0 =
1 =
Edge Programming for Receive Data Sampling
0 =
1 =
Edge Programming for GHDLC Receive Data Sampling
0 =
1 =
GHDLC Enhanced Mode
0 =
1 =
Flags (7E
Open-drain
Push-pull
Collision detection disabled
Arbitration between several GHDLC on a bus is done using
collision detection
Channel has priority class 8
Channel has priority class 10
Transmit line is only enabled during the transmission of a
message including opening and closing flags
Transmit line is always enabled
Receiver samples data on rising edge of the line clock
Receiver samples data on falling edge of the line clock
Receiver samples data on rising edge of the line clock
Receiver samples data on falling edge of the line clock
Normal Operation
GEDGE is disabled, EDGE is used for sampling the data.
Enhanced Operation
GEDGE is enabled, EDGE has to be programmed to the opposite
of GEDGE.
Note: The enhanced mode ensures proper handling of Interframe
time fill (ITF) flags with shared ’0’ (please refer to
Figure
15 µs is added to the received data.
H
) are used as interframe time fill characters
50). In enhanced operation an additional delay of
205
Register Description
PEB 20570
PEB 20571
2003-07-31