5-353293-2 TE Connectivity, 5-353293-2 Datasheet - Page 4

• Manufacturer Part Number: 5-353293-2
• Description: MINI CT MT REC ASSY 2P BLUE
• Manufacturer: TE Connectivity

Specifications of 5-353293-2

• Product Type: Connector
• Connector Type: Connector Assembly
• Termination Method To Wire/cable: IDC
• Sealed: No
• Ul File Number: E28476
• Csa File Number: LR 7189-133
• Contact - Rated Current (a): 2
• Operating Voltage Reference: AC/DC, AC, DC
• Operating Voltage (vac): 50
• Operating Voltage (vdc): 50
• Wire/cable Size (awg): 26 – 28
• Profile Height (y-axis) (mm [in]): 6.00 [0.236]
• Number Of Positions: 2
• Number Of Rows: 1
• Centerline (mm [in]): 1.50 [0.059]
• Mating Retention: With
• Length (x-axis) (mm [in]): 4.50 [0.1772]
• Width (z-axis) (mm [in]): 3.60 [0.141]
• Contact Type: Socket
• Contact Plating, Mating Area, Material: Pre-Tin
• Contact Plating, Mating Area, Thickness (µm [?in]): 0.2 [7.87]
• Contact Design: Dual Beam
• Mating Alignment: With
• Housing Color: Blue
• Ul Flammability Rating: UL 94V-0
• Rohs/elv Compliance: RoHS compliant, ELV compliant
• Lead Free Solder Processes: Not relevant for lead free process
• Rohs/elv Compliance History: Always was RoHS compliant
• Agency/standard: UL, CSA
• Operating Temperature (°c [°f]): -30 – +105 [-22 – +221]
• Applies To: Wire/Cable
• Accepts Wire Insulation Diameter, Range (mm [in]): 0.80 – 0.95 [0.030 – 0.037]
• Application Use: Wire-to-Board, Wire-to-Board / Wire-to-Wire / Wire-to-Panel, Wire-to-Panel, Wire-to-Wire
• Contact Transmits (typical Application): Signal (Data)
• Pick And Place Cover: Without
• Packaging Method: Bag, Box

ASHL-0005- ES REV B
3.8 Test Requirements and Procedures Summary:
3.8.1
3.8.2
3.8.3
3.8.4
3.8.5
Para.
Examination of Product
Termination Resistance
(Low Level)
Dielectric withstanding
Voltage
Insulation Resistance
Temperature Rising
Test Items
AMP Shanghai Ltd.
Tyco Electronics
Meets requirements of product
drawing and AMP Specification
114-5223.
10 mΩMax. (Initial)
20 mΩMax. (Final)
No creeping discharge nor
flashover shall occur.
Current leakage : 5 Ma Max.
500 MΩMin. (Initial)
100 MΩMin. (Final)
30 °C Max. under loaded
rating current.
Fig. 2 (To be continued)
Electrical Requirements
Requirements
4 of 17
PAGE
Document No.
108-5525
Visual inspection
No physical damage
Subject mated contacts assembled
in housing to 20 mV Max open
circuit at 10 mA.
Fig.4.
500 VAC for 1 minute.
Test between adjacent circuits of
mated connectors.
MIL STD 202 TEST METHOD
301
Impressed voltage 500 VDC for 1
minute.
Test between adjacent circuits of
mated connectors.
MIL STD 202 TEST METHOD
302 CONDITION A
Contacts series-wired,apply
test current of loaded rating
current to the circuit,and
measure the temperature rising
by probing on soldered areas of
contacts,after the temperature
becomes stabilized Deduct
ambient temperature from the
measured value.
Fig.4
Procedures
REV
A
LOC
ES