SI5356A-A-GM Silicon Laboratories Inc, SI5356A-A-GM Datasheet - Page 20

• Manufacturer Part Number: SI5356A-A-GM
• Description: IC CLK GENERATOR 200MHZ 24-QFN
• Manufacturer: Silicon Laboratories Inc

Specifications of SI5356A-A-GM

• Package / Case: 24-QFN
• Pll: Yes
• Input: CMOS, Crystal
• Output: CMOS
• Number Of Circuits: 1
• Ratio - Input:output: 2:8
• Differential - Input:output: No/No
• Frequency - Max: 200MHz
• Divider/multiplier: Yes/No
• Voltage - Supply: 1.71 V ~ 3.63 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Frequency-max: *
• Max Input Freq: 200 MHz
• Supply Voltage (max): 3.3 V
• Supply Voltage (min): 1.8 V
• Max Output Freq: 200 MHz
• Mounting Style: SMD/SMT
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: 336-1750 - EVALUATION BOARD FOR SI5356
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 336-1749-5

Si5356
20
GND
PAD
20
21
22
23
24
VDDOA
CLK1
CLK0
GND
GND
VDD
GND Ground.
GND Ground Pad.
VDD Clock Output Bank A Supply Voltage.
VDD Core Supply Voltage.
O
O
Power supply for clock outputs 0 and 1. May be operated from a 1.8, 2.5, or 3.3 V sup-
ply. A 0.1 μF bypass capacitor should be located very close to this pin. If CLK0/1 are not
used, this pin must be tied to pin 7 and/or pin 24.
Output Clock 1.
CMOS output clock. If unused, this pin must be left floating.
Output Clock 0.
CMOS output clock. If unused, this pin must be left floating.
Must be connected to system ground. Minimize the ground path impedance for optimal
performance of the device.
The device operates from a 1.8, 2.5, or 3.3 V supply. A 0.1 μF bypass capacitor should
be located very close to this pin.
This is the large pad in the center of the package. Device specifications cannot be guar-
anteed unless the ground pad is properly connected to a ground plane on the PCB. See
"8. Recommended PCB Layout" on page 23 for the PCB pad sizes and ground via
requirements.
Table 8. Si5356 Pin Descriptions (Continued)
Preliminary Rev. 0.3