ICS574MI IDT, Integrated Device Technology Inc, ICS574MI Datasheet - Page 3

• Manufacturer Part Number: ICS574MI
• Description: IC CLOCK ZDB 1:4 160MHZ 8SOIC
• Manufacturer: IDT, Integrated Device Technology Inc
• Type: Fanout Distribution, Zero Delay Bufferr

Specifications of ICS574MI

• Pll: Yes
• Input: CMOS
• Output: CMOS
• Number Of Circuits: 1
• Ratio - Input:output: 1:4
• Differential - Input:output: No/No
• Frequency - Max: 160MHz
• Divider/multiplier: No/Yes
• Voltage - Supply: 3 V ~ 5.5 V
• Operating Temperature: -40°C ~ 85°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC
• Frequency-max: 160MHz
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 574MI; 800-1940-5; ICS574MI

External Components
Absolute Maximum Ratings
IDT™/ ICS™ ZERO DELAY, LOW SKEW BUFFER
ICS574
ZERO DELAY, LOW SKEW BUFFER
The ICS574 requires a minimum number of external components for proper operation. Decoupling capacitors of
0.1µF should be connected between VDD and GND on pins 4 and 5, as close to the device as possible. A series
termination resistor of 33 may be used close to the pin for each clock output to reduce reflections.
Stresses above the ratings listed below can cause permanent damage to the ICS574. These ratings, which are
standard values for IDT commercially rated parts, are stress ratings only. Functional operation of the device at these
or any other conditions above those indicated in the operational sections of the specifications is not implied.
Exposure to absolute maximum rating conditions for extended periods can affect product reliability. Electrical
parameters are guaranteed only over the recommended operating temperature range.
Supply Voltage, VDD (referenced to ground)
All Inputs and Outputs
Electrostatic Discharge (MIl-STD-883)
Ambient Operating Temperature
Soldering Temperature (10 seconds max.)
Junction Temperature
Storage Temperature
Item
3
-0.5 V to 7 V
-0.5 V to VDD+0.5 V
2000 V (minimum)
-40 C to +85 C
260 C
150 C
-65 to +150 C
Rating
ICS574
REV G 051310
ZDB