SI5368B-C-GQR Silicon Laboratories Inc, SI5368B-C-GQR Datasheet - Page 6

• Manufacturer Part Number: SI5368B-C-GQR
• Description: IC CLK MULTIPLIER ATTEN 100TQFP
• Manufacturer: Silicon Laboratories Inc

Specifications of SI5368B-C-GQR

• Input: *
• Output: *
• Frequency - Max: *
• Voltage - Supply: *
• Operating Temperature: *
• Mounting Type: Surface Mount
• Package / Case: 100-TQFP, 100-VQFP
• Frequency-max: *
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Si5368
Table 1. Performance Specifications (Continued)
(V
Table 2. Absolute Maximum Ratings
6
Package
Thermal Resistance Junction
to Ambient
Notes:
DC Supply Voltage
LVCMOS Input Voltage
Junction Temperature
Storage Temperature Range
ESD HBM Tolerance (100 pF, 1.5 kΩ); All pins except
CKIN+/CKIN–
ESD MM Tolerance; All pins except CKIN+/CKIN–
ESD HBM Tolerance (100 pF, 1.5 kΩ); CKIN+/CKIN–
ESD MM Tolerance; CKIN+/CKIN–
Latch-Up Tolerance
Note: Permanent device damage may occur if the Absolute Maximum Ratings are exceeded. Functional operation should be
DD
1. For a more comprehensive listing of device specifications, please consult the Silicon Laboratories Any-Rate Precision
2. This is the amount of leakage that the 3-level input can tolerate from an external driver. See the Family Reference
3. The LVPECL and CMOS output formats draw more current than either LVDS or CML; however, there are restrictions in
= 1.8 ±5%, 2.5 V ±10%, or 3.3 V ±10%, T
Clock Family Reference Manual. This document can be downloaded from
Documentation)
Manual. In most designs, an external resistor voltage divider is recommended.
the allowed output format pin settings so that the maximum power dissipation for the TQFP devices is limited when they
are operated at 3.3 V. When there are four enabled LVPECL or CMOS outputs, the fifth output must be disabled. When
there are five enabled outputs, there can be no more than three outputs that are either LVPECL or CMOS.
restricted to the conditions as specified in the operation sections of this data sheet. Exposure to absolute maximum
rating conditions for extended periods of time may affect device reliability.
Parameter
.
Parameter
Symbol

JA
A
= –40 to 85 ºC)
Preliminary Rev. 0.41
Test Condition
Still Air
Symbol
T
V
T
V
STG
JCT
DIG
DD
www.silabs.com/timing
Min
—
–0.3 to (V
–0.5 to 3.63
–55 to 150
–55 to 150
Value
JESD78 Compliant
200
700
150
Typ
2
40
DD
+ 0.3)
(click on
Max
—
Unit
kV
ºC
ºC
V
V
V
V
V
ºC/W
Unit