NQ80331M667 S L824 Intel, NQ80331M667 S L824 Datasheet - Page 47

• Manufacturer Part Number: NQ80331M667 S L824
• Manufacturer: Intel

Specifications of NQ80331M667 S L824

• Mounting: Surface Mount
• Lead Free Status / RoHS Status: Not Compliant

Specification Changes
1.
Issue:
2.
Issue:
3.
Issue:
4.
Issue:
5.
Issue:
6.
Issue:
Specification Update
HPI# (High Priority Interrupt) is a maskable interrupt
The HPI# interrupt input is both maskable and masked by default (as are all interrupts). It is
controlled by INTCTL1.31. HPI# operates the same as the other external interrupt inputs
(S_INT[D:A]#).
PCIODT_EN Reset Strap Signal
PCI Bus ODT Enable (PCIODT_EN) is a reset strap muxed onto signal A[20] and is latched on the
rising (de-asserting) edge of P_RST#. It is used to determine when the secondary PCI(-X) bus uses
internal pull-ups on the following signals:
When disabled, then external pull-up resistors are required. PCI ODT enable is valid for the 80331
secondary PCI bus only.
Secondary PCI bus options:
LOCK# functionality has been de-featured
The LOCK# functionality of the PCI-X bridge has been de-featured from the 80331.
Watchdog Timer and Retry Timer has been de-featured
The Watchdog Timer and Retry Timer of the PCI-X bridge has been de-featured from the 80331.
P_GNT# and P_REQ# signals have new ball locations on B-0
The location of P_REQ# and P_GNT# on A-1 causes a violation of the maximum trace length
required by the PCI Local Bus Specification, Revision 2.3:
The 80331 boards need to incorporate series resistors that can be populated/de-populated for
connection to either the A-1 or B-0 P_REQ#/P_GNT# ball location. Route the P_REQ# net to the
two ball locations as separate routes through two 0 ohm series resistor located near the PCI edge
connector. Route the P_GNT# net to the two ball locations as separate routes through two 0 ohm
series resistor located near the PCI edge connector. Populate the resistor that connects the net to the
correct ball according to the silicon revision.
Peripheral Performance Monitor Unit has been de-featured
The Peripheral Performance Monitor Unit has been de-featured. The Intel XScale
still functional.
1. PCIODTEN = 1 (default), enables 8.2 K internal pull-ups to 3.3 V.
2. PCIODTEN = 0, external 8.2 K pull-ups to 3.3 V are required.
S_AD[63:32], S_C/BE[7:4]#, S_PAR64, S_REQ64#, S_REQ[3:0]#, S_ACK64#,
S_FRAME#, S_IRDY#, S_DEVSEL#, S_TRDY#, S_STOP#, S_PERR#, S_LOCK#,
S_M66EN, S_SERR# and S_INT[D:A]#.
P_REQ# signal is moving from T6 on A-1 to H11 on B-0.
P_GNT# signal is moving from R4 on A-1 to G12 on B-0.
Intel
Specification Changes
®
80331 I/O Processor
®
core PMON is
47