LPC47M142-NC Standard Microsystems (SMSC), LPC47M142-NC Datasheet - Page 62

no-image

LPC47M142-NC

Manufacturer Part Number
LPC47M142-NC
Description
Manufacturer
Standard Microsystems (SMSC)
Datasheet

Specifications of LPC47M142-NC

Lead Free Status / RoHS Status
Not Compliant

Available stocks

Company
Part Number
Manufacturer
Quantity
Price
Part Number:
LPC47M142-NC
Manufacturer:
SMSC
Quantity:
55
Part Number:
LPC47M142-NC
Quantity:
1 715
Part Number:
LPC47M142-NC
Manufacturer:
SMSC
Quantity:
281
Bit 4,5
Reserved
Bit 6,7
These bits are used to set the trigger level for the RCVR FIFO interrupt.
INTERRUPT IDENTIFICATION REGISTER (IIR)
Address Offset = 2H, DLAB = X, READ
By accessing this register, the host CPU can determine the highest priority interrupt and its source. Four levels of
priority interrupt exist. They are in descending order of priority:
Information indicating that a prioritized interrupt is pending and the source of that interrupt is stored in the Interrupt
Identification Register (refer to Interrupt Control Table). When the CPU accesses the IIR, the Serial Port freezes all
interrupts and indicates the highest priority pending interrupt to the CPU. During this CPU access, even if the Serial Port
records new interrupts, the current indication does not change until access is completed. The contents of the IIR are
described below.
Bit 0
This bit can be used in either a hardwired prioritized or polled environment to indicate whether an interrupt is pending.
When bit 0 is a logic "0", an interrupt is pending and the contents of the IIR may be used as a pointer to the appropriate
internal service routine. When bit 0 is a logic "1", no interrupt is pending.
Bits 1 and 2
These two bits of the IIR are used to identify the highest priority interrupt pending as indicated by the Interrupt Control
Table.
Bit 3
In non-FIFO mode, this bit is a logic "0". In FIFO mode this bit is set along with bit 2 when a timeout interrupt is pending.
Bits 4 and 5
These bits of the IIR are always logic "0".
Bits 6 and 7
These two bits are set when the FIFO CONTROL Register bit 0 equals 1.
SMSC DS – LPC47M14X
1) Receiver Line Status (highest priority)
2) Received Data Ready
3) Transmitter Holding Register Empty
4) MODEM Status (lowest priority)
Bit 7
0
0
1
1
Bit 6
0
1
0
1
Trigger Level (BYTES)
Page 62
RCVR FIFO
14
1
4
8
Rev. 05/02/2000

Related parts for LPC47M142-NC