FDC37B782-NS Standard Microsystems (SMSC), FDC37B782-NS Datasheet - Page 122

• Manufacturer Part Number: FDC37B782-NS
• Manufacturer: Standard Microsystems (SMSC)

Specifications of FDC37B782-NS

• Lead Free Status / RoHS Status: Supplier Unconfirmed

port address may be re-programmed to 0xE0,
0xE2, 0xE4 or 0xEA; the Data port address is
automatically set to the Index port address + 1.
Upon exiting the configuration state the new Index
Note 1:
RUN STATE REGISTER
These registers can also be accessed through the configuration registers L8 - CRxx, as shown,
when the FDC37B78x is in the configuration state.
ADDRESS (INDEX)
NAME
PORT
Index
Data
TABLE 54 - RUN STATE ACCESSABLE CONFIGURATION REGISTERS
0x0A
0x0B
0x01
0x03
0x05
0x06
0x08
0x09
Index address + 1
0xE0, E2, E4, EA
ADDRESS
TABLE 53 - INDEX AND DATA PORTS
PORT
REGISTER (CONFIGURATION STATE ADDRESSING
Soft Power Enable Register 1 (L8-CRB0)
Soft Power Enable Register 2 (L8-CRB1)
Soft Power Status Register 1 (L8-CRB2)
Soft Power Status Register 2 (L8-CRB3)
0x01-0x0F
Access to GP1, Watchdog Timer Control,
GP5, GP6, and the Soft Power Status and
Enable registers (see TABLE 54).
Watchdog Timer Control (L8 - CRF4)
125
and Data port addresses are used to access the
GPIO data, Soft Power Status and Enable, and
the Watchdog Timer Control registers.
For example, to access the GP1 data register
when in the run state, the host should perform an
I/O Write of 0x01 to the Index port address (0xEX)
to select GP1 and then read or write the Data port
(at Index+1) to access the GP1 register.
Generally, to access any GPIO data register GPx
the host should perform an I/O Write of 0x0X to
the Index port address and then access GPX
through the Data port.
Watchdog Timer Control registers are accessed
similarly.
GP6 (L8 - CRFA)
GP1 (L8 - CRF6)
GP5 (L8 - CRF9)
RUN STATE ACCESS
The Soft Power and
1
)