Z6S248C STEC, Z6S248C Datasheet - Page 69

• Manufacturer Part Number: Z6S248C
• Manufacturer: STEC
• Type: Solid State Driver

Specifications of Z6S248C

• Density: 48GByte
• Operating Supply Voltage (typ): 5V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: Not Required
• Mounting: Screw
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Lead Free Status / RoHS Status: Compliant

Zeus 2.5-Inch Serial ATA Solid State Drive
Restriction of Hazardous Materials
STEC Inc. has adopted the RoHS Directive, also known as the Restriction of Hazardous Substances
Directive. Zeus SSDs are compliant with the European Parliament and Council Directive, i.e.,
assembled with Pb-free or lead-free components.
Shock and Vibration
This section specifies the capability of the device to withstand shock and vibration. Shock and
vibration are specified on the drive chassis. Resonance may occur if the drive is placed in an
enclosure. It is the responsibility of the user to design the mounting such that the drive movement is
within the specified ranges despite resonance.
Failure Criteria
Test failures are defined as:
Random Vibration
For random vibration, the drives will perform without any errors after being tested at 15 min/axis on
three axes (X, Y and Z). During the operational vibration, the drive will be performing continuous
reads. The SSD also adheres to 16.3G RMS per MIL-STD-810F (Random, 20 Hz to 2,000 Hz; 3
vibration axes). Vibration levels are listed in Table 20. In addition to the previously mentioned Failure
Criteria, during the operating random vibration, the transfer rate of the drive should not degrade by
more than 10%.
Shock
The SSD is shock-tested in accordance with MIL-STD-810F and will operate as specified, without
degradation, when subjected to the following conditions outlined in Table 21.
•
•
•
Any single hard error (unrecoverable error)
Damage that renders a product inoperable
Failure meet performance specifications
Parameter
Test Condition
Three 50G Shocks (Peak Value, 11ms
duration, half-sine waveform) along the
X, Y and Z axis.
Operating Vibration
Table 20.
Table 21.
Value
16.3
Random Vibration Levels
Shock Test Results
Condition
G, RMS, 20Hz, 1 Hour Duration, 3 Axes
Result
1,500G Operating Shock
51