Z6S248C STEC, Z6S248C Datasheet - Page 47

• Manufacturer Part Number: Z6S248C
• Manufacturer: STEC
• Type: Solid State Driver

Specifications of Z6S248C

• Density: 48GByte
• Operating Supply Voltage (typ): 5V
• Operating Temperature (min): 0C
• Operating Temperature (max): 70C
• Package Type: Not Required
• Mounting: Screw
• Operating Temperature Classification: Commercial
• Operating Supply Voltage (min): 4.75V
• Operating Supply Voltage (max): 5.25V
• Lead Free Status / RoHS Status: Compliant

Write Multiple (C5h)
This command is similar to the Write Sector(s) - 30h command. Interrupts are not presented on each
sector, but on the transfer of a block which contains the number of sectors defined by the Set Multiple
Mode - C6h command.
Write Multiple Ext (39h)
This command is mandatory for devices that implement the 48-bit Address feature set. The command
will write the number of logical sectors specified in the Count field. The command is similar to Write
Sector(s) (30h). Interrupts are not presented on each sector, but on the transfer of blocks that contain
the number of sectors defined by LBA mode.
Write Multiple FUA Ext (CEh)
This command is mandatory for devices that implement the 48-bit Address feature set. The command
has the same functionality of Write Multiple Ext (39h), except that regardless of whether write caching
is enabled, the user data is written to the media before the ending status of the command is reported.
Write Sector(s) (30h)
This command will write from 1 to 256 sectors as specified in the Sector Count Register. A sector
count of 0 (zero) will request 256 sectors. The transfer begins at the sector specified in the Sector
Number Register.
Write Sector(s) Ext (34h)
This command is mandatory for devices that implement the 48-bit Address feature set. The command
will write 1 to 65,536 logical sectors as specified in the Sector Count Register. A sector count value
of 0 will request 65,536 logical sectors.
Zeus 2.5-Inch Serial ATA Solid State Drive
29