IDT1893CFLFT IDT, Integrated Device Technology Inc, IDT1893CFLFT Datasheet - Page 86

• Manufacturer Part Number: IDT1893CFLFT
• Manufacturer: IDT, Integrated Device Technology Inc

Specifications of IDT1893CFLFT

• Lead Free Status / RoHS Status: Compliant

ICS1893CF, Rev. J, 08/11/09
Note:
Table 8-5. PHY Address and LED Pins
P0AC
P1CL
Name
Pin
Each of these pins monitor the data link by providing signals that directly drive LEDs.
ICS1893CF Data Sheet - Release
Number
Pin
1
3
Input or
Input or
Output
Output
Type
Pin
Copyright © 2009, Integrated Device Technology, Inc.
PHY (Address Bit) 0 / Activity LED.
For more information on this pin, see
As an input pin:
As an output pin:
PHY (Address Bit) 1 / Collision LED.
For more information on this pin, see
As an input pin:
As an output pin:
Caution:
Caution:
•
•
•
•
•
•
•
This multi-function configuration pin is:
– An input pin during either a power-on reset or a hardware reset. In
– An output pin following reset. In this case, this pin provides indication
This pin establishes the address for the ICS1893CF. When the signal
on this pin is logic:
– Low, that address bit is set to logic zero.
– High, that address bit is set to logic one.
When the signal on this pin is:
– De-asserted, this state indicates the ICS1893CF does not have
– Asserted, this state indicates the ICS1893CF has activity.
This multi-function configuration pin is:
– An input pin during either a power-on reset or a hardware reset. In
– An output pin following reset. In this case, this pin provides collision
This pin establishes the address for the ICS1893CF. When the signal
on this pin is Logic:
– Low, that address bit is set to logic zero.
– High, that address is set to logic one.
When the signal on this pin is:
– De-asserted, this state indicates the ICS1893CF does not detect any
– Asserted, this state indicates the ICS1893CF detects collisions.
The ICS1893CF asserts its Collision LED for a period of approximately
70 msec when it detects a collision.
this case, this pin configures the ICS1893CF PHY address Bit 0.
of Receive “OR” Transmit activity.
activity.
this case, this pin configures the ICS1893CF PHY Address Bit 1.
status for the ICS1893CF.
collisions.
This pin must not float. (See the notes at
“Multi-Function (Multiplexed) Pins: PHY Address and LED
Pins”.)
This pin must not float. (See the notes at
“Multi-Function (Multiplexed) Pins: PHY Address and LED
Pins”.)
All rights reserved.
86
Chapter 8 Pin Diagram, Listings, and Descriptions
Pin Description
Section 5.5, “Status
Section 5.5, “Status
Section 8.2.2,
Section 8.2.2,
Interface”.
Interface”.
August, 2009