PCF8583P NXP Semiconductors, PCF8583P Datasheet - Page 12

• Manufacturer Part Number: PCF8583P
• Manufacturer: NXP Semiconductors

Specifications of PCF8583P

• Bus Type: Serial (2-Wire, I2C)
• Operating Supply Voltage (typ): 3.3/5V
• Package Type: PDIP
• Operating Supply Voltage (max): 6V
• Operating Supply Voltage (min): 2.5V
• Operating Temperature Classification: Industrial
• Operating Temperature (max): 85C
• Operating Temperature (min): -40C
• Pin Count: 8
• Mounting: Through Hole
• Date Format: DW:DM:M:Y
• Time Format: HH:MM:SS:hh
• Lead Free Status / RoHS Status: Compliant

NXP Semiconductors
PCF8583
Product data sheet
Fig 12. Alarm and timer interrupt logic diagram
(1) If the alarm enable bit of the control and status register is reset (logic 0), a 1 Hz signal is observed on the interrupt pin INT.
7
7.8 Event counter mode
CONTROL/STATUS
6
REGISTER
Event counter mode is selected by bits 4 and 5 which are logic 10 in the control and status
register. The event counter mode is used to count pulses externally applied to the
oscillator input (OSCO left open-circuit).
The event counter stores up to 6 digits of data, which are stored as 6 hexadecimal values
located in the registers 1h, 2h, and 3h. Therefore, up to 1 million events may be recorded.
An event counter alarm occurs when the event counter registers match the value
programmed in the registers 9h, Ah, and Bh, and the event alarm is enabled (bits 4 and 5
which are logic 01 in the alarm control register). In this event, the alarm flag (bit 1 of the
control and status register) is set. The inverted value of this flag can be transferred to the
interrupt pin (pin 7) by setting the alarm interrupt enable in the alarm control register. In
5
4
(1)
3
counter
control
alarm
clock
2
All information provided in this document is subject to legal disclaimers.
interrupt
ALARM
1
alarm
Rev. 06 — 6 October 2010
0
CLOCK/CALENDAR
control
alarm
select
mode
MUX
alarm
timer
timer overflow
overflow
TIMER
7
interrupt
oscillator
Clock and calendar with 240 x 8-bit RAM
6
control
timer
5
INT
4
3
ALARM CONTROL
2
REGISTER
1
013aaa377
PCF8583
© NXP B.V. 2010. All rights reserved.
0
12 of 37