SP400-0.007-00-104 Bergquist, SP400-0.007-00-104 Datasheet - Page 15
![THERMAL PAD TO-220 .007" SP400](/photos/5/95/59572/3223-07fr-90__104_sml.jpg)
SP400-0.007-00-104
Manufacturer Part Number
SP400-0.007-00-104
Description
THERMAL PAD TO-220 .007" SP400
Manufacturer
Bergquist
Series
Sil-Pad® 400r
Specifications of SP400-0.007-00-104
Usage
TO-218, TO-220, TO-247
Shape
Rectangular
Outline
25.40mm x 19.05mm
Thickness
0.007" (0.178mm)
Backing, Carrier
Fiberglass
Color
Gray
Thermal Resistivity
1.13°C/W
Thermal Conductivity
0.9 W/m-K
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Adhesive
-
Other names
3223-07FR-104
BER204
BG426704
BER204
BG426704
Base Thickness
Copper and aluminum Thermal Clad is normally purchased in one of
the standard-gauge thicknesses shown in the table below. Non-stan-
dard thicknesses are also available.
Electrical Connections To Base Plate
If a connection to the base plate is desired, copper is the most com-
patible base layer to use. When using electrical or thermal vias, it is
important to match the circuit and base coefficients of thermal TCE
expansion as closely as possible. Otherwise, excess plated-hole stress
will occur during thermal cycles. Other base layer materials can be
used for connection, but will require different connection schemes.
Costs
The most cost effective base layers are aluminum and copper
because they represent industry standards. Copper is more expensive
than aluminum when comparing the like thicknesses, but can be the
less expensive option if design considerations allow for a thinner layer.
As an example, typically the cost of 0.040" (1.0mm) copper is equal
to the cost of 0.125" (3.2mm) aluminum.
Aluminum - Thicknesses
Copper - Thicknesses
*Standard thicknesses highlighted
Inches
Inches
0.020
0.040
0.062
0.080
0.125
0.040
0.080
0.125
0.032
0.160
0.190
0.020
0.032
0.060
Millimeters
Millimeters
0.51
0.81
1.02
1.57
2.03
3.18
4.06
4.83
0.50
0.81
1.02
1.52
2.03
3.18
Surface Finish
Aluminum and copper base layers come with a uniform commercial
quality brushed surface. Aluminum is also available anodized with
choices of clear, black, blue and red colors.
Standard Thermal Clad Panels
Available in:
• 18" (457mm) x 24" (610mm)
• 18" (457mm) x 25" (635mm)
• 20" (508mm) x 24" (610mm)
Usable area: 17" (432mm) x 23" (584mm)
Usable area: 17" (432mm) x 24" (610mm)
Usable area: 19" (483mm) x 23" (584mm)
13