C8051F066-GQ Silicon Laboratories Inc, C8051F066-GQ Datasheet - Page 28

• Manufacturer Part Number: C8051F066-GQ
• Description: MCU 8-Bit C8051F06x 8051 CISC 32KB Flash 3.3V 100-Pin TQFP
• Manufacturer: Silicon Laboratories Inc
• Series: C8051F06xr

Specifications of C8051F066-GQ

• Package: 100TQFP
• Device Core: 8051
• Family Name: C8051F06x
• Maximum Speed: 25 MHz
• Operating Supply Voltage: 3.3 V
• Data Bus Width: 8 Bit
• Number Of Programmable I/os: 59
• Interface Type: I2C/SMBus/SPI/UART
• On-chip Adc: 2-chx16-bit
• Number Of Timers: 5
• Ram Size: 4.25 KB
• Program Memory Size: 32 KB
• Program Memory Type: Flash
• Operating Temperature: -40 to 85 °C
• Core Processor: 8051
• Core Size: 8-Bit
• Speed: 25MHz
• Connectivity: EBI/EMI, SMBus (2-Wire/I²C), SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, POR, PWM, WDT
• Number Of I /o: 59
• Voltage - Supply (vcc/vdd): 2.7 V ~ 3.6 V
• Data Converters: A/D 2x16b
• Oscillator Type: Internal
• Package / Case: 100-TQFP, 100-VQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Eeprom Size: -
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 336-1221

breakpoints, watchpoints, a stack monitor, and single stepping. No additional target RAM, program mem-
ory, timers, or communications channels are required. All the digital and analog peripherals are functional
and work correctly while debugging. All the peripherals (except for the ADCs and SMBus) are stalled when
the MCU is halted, during single stepping, or at a breakpoint in order to keep them synchronized with
instruction execution.
The C8051F060DK development kit provides all the hardware and software necessary to develop applica-
tion code and perform in-circuit debugging with the C8051F06x MCUs. The kit includes a Windows (95 or
later) development environment, a serial adapter for connecting to the JTAG port, and a target application
board with a C8051F060 MCU installed. All of the necessary communication cables and a wall-mount
power supply are also supplied with the development kit. Silicon Labs’ debug environment is a vastly supe-
rior configuration for developing and debugging embedded applications compared to standard MCU emu-
lators, which use on-board "ICE Chips" and target cables and require the MCU in the application board to
be socketed. Silicon Labs' debug environment both increases ease of use and preserves the performance
of the precision, on-chip analog peripherals.
C8051F060/1/2/3/4/5/6/7
1.3.
The C8051F06x family has on-chip JTAG boundary scan and debug circuitry that provides non-intrusive,
full speed, in-circuit debugging using the production part installed in the end application, via the four-pin
JTAG interface. The JTAG port is fully compliant to IEEE 1149.1, providing full boundary scan for test and
manufacturing purposes.
Silicon Laboratories' debugging system supports inspection and modification of memory and registers,
28
JTAG Debug and Boundary Scan
WINDOWS 95 OR LATER
Figure 1.8. Development/In-System Debug Diagram
Development Environment
Silicon Labs Integrated
Adapter
Serial
Rev. 1.2
JTAG (x4), VDD, GND
TARGET PCB
C8051
F060