OS532E NEWPORT ELECTRONICS, OS532E Datasheet - Page 60

• Manufacturer Part Number: OS532E
• Description: INFRARED THERMOMETER, -18°C TO 538°C
• Manufacturer: NEWPORT ELECTRONICS

Specifications of OS532E

• Temperature Measuring Range: -18°C To 538°C
• Temperature Tester Type: Thermocouple - Type K
• Accuracy %: 1%
• Wavelength Max: 670nm

The Laser "line of sight"
No Laser Beam
The temperature reading
is erratic. The thermometer
has just been moved from
one extreme temperature
to room temperature [0°C
or 50°C (32°F or 122°F)]
or vice versa.
The temperature reading
is erratic. The thermometer
has just been moved from
room temperature
(ambient temperature) to a
temperature 10°C colder
or warmer.
does not coincide
with the center of the
target.
Problem
1. The thermometer has to stabilize
1. The thermometer has to stabilize
1. The line of sight and the center
1. Make sure the trigger is pulled
before taking temperature
measurements. It takes up to 30
minutes for the thermometer to
stabilize.
before taking temperature
measurements. It takes up to 20
minutes for the thermometer to
stabilize.
of the target are offset by design.
(refer to Figure 3-4 and the
explanation above it for how
to compensate for this).
and the laser power switch is
turned on. (The red power LED
should be lit).
Troubleshooting Guide
Solution
☞
7
7-3