OS532E NEWPORT ELECTRONICS, OS532E Datasheet - Page 36

• Manufacturer Part Number: OS532E
• Description: INFRARED THERMOMETER, -18°C TO 538°C
• Manufacturer: NEWPORT ELECTRONICS

Specifications of OS532E

• Temperature Measuring Range: -18°C To 538°C
• Temperature Tester Type: Thermocouple - Type K
• Accuracy %: 1%
• Wavelength Max: 670nm

Sending temperature data to PC in Real Time:
1. From Windows Operation System, Go to Start
2. Check the RS232 connection between the infrared thermometer and the
Current Temperature = 74ºF
Distance=Unknown (Until distance measurement is made)
E=0.95 (Emissivity)
MAX = 85ºF
(Maximum Temperature)
MIN = 72ºF
(Minimum Temperature)
DIF = 13ºF
(Differential Temperature)
AVG = 73ºF
(Average Temperature)
You can also start the data transmission from the thermometer side by
going to the PRN display menu, and pressing the
icon will appear on the LCD and data transmission starts. You can stop the
data transmission from the PC side by clicking the Stop button. You can also
stop the data transmission from the thermometer side by pressing the
key again while in the PRN display menu. The
from the LCD, and data transmission stops.
Infrared Temperature Measurement
PC. Select your serial COM Port number from the Communication Port
Setting menu on the menu bar. Turn on the infrared thermometer by
pulling & locking the trigger. From the program screen, click the Start
button. This initiates data transmission from the thermometer to the PC.
The data will fill in the screen as shown. If no data appears, you need to check
the COM port number or the RS232 connection. Here is a list of data sent:
Using the Handheld Infrared Thermometer
HAL=1000ºF
(High alarm set point)
LAL = -10ºF
(Low alarm set point)
TC = 76ºF
(Thermocouple temperature)
PRN = 2 second
(Data Transmission interval)
AMB = 75ºF
(Target Ambient temperature)
IRTM then click.
LOCK
Program
icon will disappear
key. The
Omega
LOCK
2
2-21