72-1015 TENMA, 72-1015 Datasheet - Page 51

• Manufacturer Part Number: 72-1015
• Description: MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT
• Manufacturer: TENMA

Specifications of 72-1015

• Dmm Type: Bench
• Voltage Measuring Range Dc: 600mV To 1000V
• Voltage Measuring Range Ac: 600mV To 1000V
• Current Measuring Range Dc: 60µA To 10A
• Current Measuring Range Ac: 60µA To 10A
• Lead Free Status / RoHS Status: na

Model 72-1015: OPERATING MANUAL
B. Replacing the Fuses (see figure 12)
To avoid electrical shock or arc blast, or personal
injury or damage to the Meter, use specified fuses
ONLY in accordance with the following procedure.
To replace the Meter’s fuse:
1. Press the POWER to turn the Meter off, disconnect
2. Fuse 1: Remove the screws from the power socket
the power cord and remove all connections from the
terminals.
at the rear of the Meter. Remove the fuse by gently
prying
its bracket. Then install the replacement fuse.
Fuse 2 and 3: Use a coin to open the accessories
compartment at the top of the front cover, then you
will see a fuse compartment. Open the fuse
compartment to replace fuse 2 and 3. Remove the
fuse by gently prying one end loose, then take out
the fuse from its bracket.
Then install the replacement fuse.
Warning
one end loose, then take out the fuse from
(Figure 12)
49