72-1015 TENMA, 72-1015 Datasheet - Page 24

• Manufacturer Part Number: 72-1015
• Description: MULTIMETER, DIGITAL, BENCH, 3-3/4 DIGIT
• Manufacturer: TENMA

Specifications of 72-1015

• Dmm Type: Bench
• Voltage Measuring Range Dc: 600mV To 1000V
• Voltage Measuring Range Ac: 600mV To 1000V
• Current Measuring Range Dc: 60µA To 10A
• Current Measuring Range Ac: 60µA To 10A
• Lead Free Status / RoHS Status: na

D. Testing Continuity (See figure 6)
To avoid damage to the Meter or to the devices under
test, disconnect circuit power and discharge all the
high-voltage capacitors before testing for continuity.
To avoid personal injury, please do not attempt to
input voltages higher than 60V DC or 30V AC.
To test for continuity, connect the Meter as below:
1.
2.
3.
4.
22
Insert the red test lead into the
black test lead into the COM terminal.
Set the rotary switch to
button to select
Connect the test lead across with the object being
measured. The buzzer sounds if the resistance of a
circuit under test is < 70 , the circuit is in good
condition. The buzzer does not sound if the resistance
of a circuit under test is >70 , the circuit is broken.
The measured value shows on the display and the
Warning
unit is
.
measurement mode.
and press SELECT
terminal and the
Model 72-1015: OPERATING MANUAL
(Figure 6)