AC8A OPTO 22, AC8A Datasheet - Page 8

• Manufacturer Part Number: AC8A
• Description: Computers, Interface Cards
• Manufacturer: OPTO 22

Specifications of AC8A

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Features: Half Duplex Modem Interface, 115VAC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

DATA SHEET
Form 043-061030
Opto 22 • 43044 Business Park Drive • Temecula, CA 92590-3614 • Phone: [phone] • (800) 321-OPTO • Fax: [phone] • www.opto22.com
Installation
Installing the AC8
Mounting the AC8 Adapter Card
through the four stand-offs in the corners of the AC8 adapter card. The AC8 can be mounted in any physical orientation.
The following tools and materials are necessary for installing the AC8
• Drill and tap for #6 screws or equivalent
• Medium sized, flat-blade screwdriver
• Wire stripper
• Mounting hardware, #6 or equivalent
• Variety of color-coded wires, #22 AWG or larger
• A standard DB25, RS-232 data cable with a male connector for the AC8 end
Caution: Before connecting or disconnecting anything, turn off the power on the Optomux network and the modem. This is absolutely necessary; as with power
applied, it is possible to damage the circuits.
The AC8/AC8A/AC8B (Figure 6), is designed to operate inside an electrical enclosure. Mount the AC8 to a surface with screws
Inside Sales: (800) 321-OPTO • Product Support: (800) TEK-OPTO • [phone] • Fax: [phone] • Email: [e-mail]
© 2004 Opto 22. All rights reserved. All trademarks, trade names, logos, and service marks referenced herein belong to their respective companies.
Figure 6 - Dimensions and Layout of the AC8 Adapter Card
TRADITIONAL ADAPTER CARDS
INTERFACES
STAND-ALONE
page 8/11