NT631C-ST153-EV3 Omron, NT631C-ST153-EV3 Datasheet - Page 62

• Manufacturer Part Number: NT631C-ST153-EV3
• Description: 10.48-ColrDisplay,TFT,Ivy,Eng
• Manufacturer: Omron

Specifications of NT631C-ST153-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Errors When Using a
Memory Unit
Using a Memory Unit
Reference:
Current Memory Unit Screen Data
The available transmitting destinations are altered depending on the settings
of the origin of transmitting as described in the table below.
4. Press Execute.
5. Switch the NT631/NT631C power OFF, remove the Memory Unit, then
If an error occurs when using the Memory Unit, the NT631/NT631C operates
as follows.
PT screen
PT system
PT system/screen
Memory Unit Bank 0
Memory Unit Bank 1
Memory Unit Bank 0/1
• In the case of system program:
• In the case of screen data:
• When transmitting the system program and screen data simultaneously
• When writing the system program into the NT631/NT631C, the type of
• The details of the error and remedial action are displayed on the screen.
• The continuous buzzer sounds.
from the PT to the Memory Unit, the setting of banks is Bank 0: system
program, Bank 1: screen data, and when transmitting them from the
Memory Unit to the PT, either of the following combinations must be used.
Bank 0: system program, Bank 1: other than system program
Bank 0: other than system program, Bank 1: system program
system program inside Memory Unit and the type of PT must correspond.
The data is transmitted.
The messages Preparing, Transmitting, Verifying, and Finished are dis-
played in accordance with the progress of data transmission. At the same
time, the progress of data transmitting status is displayed by the means of
the number of bytes and blocks (1 bank = 16 block = 1024k byte).
When the data transmission is operated manually, RUN LED remains OFF.
switch the NT631/NT631C power back ON.
Source
The first line:
The second line:
(The second line may not be displayed in the system program for some
models.)
The comment for the screen data in the NT631/NT631C is displayed
here.
Each screen has touch switches to change the display language from
one to the other. When the manual data transmission is operating, the
content of error and remedial action are shown with selected lan-
guage. When the automatic transmission is operating, it is displayed in
Japanese.
Memory Unit Bank 0/1 (fixed)
If system program is selected
PT system (fixed)
If screen data is selected
PT screen (fixed)
PT system/screen (fixed)
Memory unit Bank 0
Compatible PT type for the system program in-
side the Memory Unit.
System program name and Version for the sys-
tem program inside the Memory Unit.
Destination
Memory unit Bank 1
Section 3-5
45