NT631C-ST153-EV3 Omron, NT631C-ST153-EV3 Datasheet - Page 234

• Manufacturer Part Number: NT631C-ST153-EV3
• Description: 10.48-ColrDisplay,TFT,Ivy,Eng
• Manufacturer: Omron

Specifications of NT631C-ST153-EV3

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

6-12-3 Method of Use
Key Operations
Programming Console Function
Reference:
The Programming Console screen is displayed by operating the system menu
as described below.
*1
If an error screen is displayed, the System Menu can be displayed from the
error screen by pressing two of the four corners of the touch panel
simultaneously. Pressing the OK touch switch on the error screen will return
the display to that immediately before the error occurred, but only if the cause
of the error is removed. If this does not happen, press two of the four corners
of the touch panel to display the System Menu.
Mode Selection Keys, Mode Lock Key
The display element on the Programming Console screen shown below com-
prises the mode selection keys, which change the operation mode of the PLC,
and the mode lock key, which prevents unintended mode changes.
With the CS1G/CS1H, the Programming Console function can not be used
simultaneously at both the built-in RS-232C port and peripheral port.
Ver 4.12
The Programming Console screen is
displayed.
Press the Quit touch switch to exit the
screen.
Press the Programming Console sheet
keys (touch switches) for the operation.
An error is displayed if a wrong
communications protocol is selected
or a Programming Console is
connected to the peripheral port.
Select Expansion Mode.
Select Programming Console.
Mode selection keys
Mode lock key
Section 6-12
(*1)
217