NSH5-232CW-3M Omron, NSH5-232CW-3M Datasheet - Page 21

• Manufacturer Part Number: NSH5-232CW-3M
• Description: HMI
• Manufacturer: Omron

Specifications of NSH5-232CW-3M

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

5
Operating Environment Precautions
Operating Environment Precautions
!Caution Do not install the control system in the following locations.
• When disposing of batteries, comply with all local ordinances that apply to
• Do not connect a USB connector to any device that is not applicable.
• Before connecting a USB connector to a device, check the external
• When mounting the battery, be sure to use the correct battery and mount
• Dispose of the product and batteries according to local ordi-
• The backlight in the PT contains mercury. Do not dispose of the PT
• Do not turn OFF the power supply to the PT while downloading or upload-
• Secure the PT’s cable at the control panel when connecting it to the con-
• Be sure not to trip over the cable when moving around while holding the
• This is a class A product. In residential areas it may cause radio interfer-
• Locations subject to severe changes in temperature
• Locations subject to temperatures or humidity outside the range specified
• Locations subject to condensation as a result of severe changes in tem-
• Locations subject water, oil, or chemical spray
• Locations subject to corrosive or flammable gases
• Locations subject to shock or vibration
• Locations outdoors directly subject to wind or rain
• Locations subject to strong ultraviolet light
disposal.
appearance of the device and make sure that the device is free from dam-
age.
it correctly.
nances as they apply. Have qualified specialists properly dis-
pose of used batteries as industrial waste.
together with other waste to be sent to a disposal site. Dispose of the PT
according to local ordinances as they apply.
ing screen data or system programming. The screen data and system
programming may become corrupted.
trol panel.
PT.
ence, in which case the user may be required to take adequate measures
to reduce interference.
in the specifications
perature
xxi
5