D4NS-3CF Omron, D4NS-3CF Datasheet - Page 11

• Manufacturer Part Number: D4NS-3CF
• Description: DoorSwitch/NPT/2NC1NO
• Manufacturer: Omron
• Series: D4NSr
• Type: Safety Door Key Switchr

Specifications of D4NS-3CF

• Circuit: 3PST (2-NC, 1-NO)
• Switch Function: On-Off, Off-On
• Contact Rating @ Voltage: 3A @ 250VAC
• Actuator Type: Panel Disconnect
• Mounting Type: Chassis Mount
• Termination Style: Screw Terminal
• Operating Force: 1500gf
• Contact Form: 2 NC / 1 NO
• Contact Rating: 10 Amps at 120 VoltsAC, 240 VoltsAC
• Actuator: Key
• Key Type: Key
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: D4NS3CF; Z2733

Recommended Connectors
Use the connector with thread section of 9 mm long or less. In the
case of the connector with longer thread section, protruded part may
interfere with the other parts inside the body. Use below listed
connector to secure IP67.
When use LAPP's products, use together with a Seal Packing which
is sold separately (Type names, JPK-16, GP-13.5, GPM20. GPM12
is for M12 connector) and tighten with proper tightening torque.
LAPP is a German manufacturer.
Before using the 2 conduit type 1/2-14NPT connector, attach the
appended changing adapter to the Switch, and wind the seal tape
about the joint of the adapter and Switch.
When use M12 conduit type, connect the above listed connector,
after tightened the M12 changing adaptor to the Switch.
A-14
G1/2
Pg13.5
M20
1/2-14NPT
Size
LAPP
LAPP
LAPP
LAPP
Safety-door Switch
Manufacture
ST-PF1/2
5380-1002
S-13.5
5301-5030
ST-M20
5311-1020
ST-NPT1/2
5301-6030
Type
D4NS
1.5
6.0 to 12.0 mm
6.0 to 12.0 mm
7.0 to 13.0 mm
6.0 to 12.0 mm
Adequate cable
diameter