DRT2-MD32B Omron, DRT2-MD32B Datasheet - Page 326

• Manufacturer Part Number: DRT2-MD32B
• Description: 16In,16Out Horiz MIL Conn NPN
• Manufacturer: Omron

Specifications of DRT2-MD32B

• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

7-1-9
Analog Input Terminals
Overview of Analog Slaves
(Allocate to a fixed area in the Master.)
Set the input range by turning ON DIP
switch pin 8 and using pins 1 to 3 for inputs
0 and 1 or pins 4 to 6 for inputs 2 and 3.
(After changing the setting, toggle the pow-
er supply or reset the Unit from the Config-
urator.)
Set the node address using rotary switches or Configurator. (After changing
the setting, toggle the power supply or reset the Unit from the Configurator.)
Connect the communications cables
Use Analog Slave functions or
Use the same input range for
Use the same input range for
Application Procedure Flowchart
Use all four inputs? (Input
bits cannot be changed with
the DRT2-AD04H.)
analog input values only in
Fixed allocations
Use default and allocate
maintenance functions.
Yes
Input 0 and 1
Input 2 and 3
the Master.
Yes
No
(Allocate to a user-specified area in the Master.)
With the Configurator online, set the number of AD conversion
words from the Slave’s Edit Device Parameters Window,
download the settings to the Slave, and reset the Unit.
Yes
With the Configurator online, select the preferred
I/O data pattern from the pull-down menu under
Default Connection Path (In/Out) in the Slave’s
Edit Device Parameters Window, download the
settings to the Slave, and reset the Unit.
With the Configurator online, select desired
functions from the Slave’s Edit Device Parameters
Window, download the settings, and reset the Unit.
With the Configurator online, set the input range from
the Slave’s Edit Device Parameters Window, download
the settings to the Slave, and reset the Unit
No
No
(patterns) in the Master.
User allocations
Allocate I/O data
Yes
With the Configurator online
• Set the Slave’s I/O size.
• Select the Slave in the Master’s Edit Device
(Allocate to a user-specified area in the Master.)
Parameters Window, set the connection
No
User allocations
Section 7-1
305