BK2534 B&K Precision, BK2534 Datasheet - Page 26

• Manufacturer Part Number: BK2534
• Description: OSCOPE 60MHZ DIGITAL STORAGE
• Manufacturer: B&K Precision
• Type: Bench, Digitalr

Specifications of BK2534

• Includes: Probes, Software, USB Cable
• Bandwidth: 60MHz
• Channels: Dual
• Display Type: LCD - Color
• Features: Software Controllable, USB Port, Waveform Capture
• Probe Type: PR-37A x1/x10/Ref Probes (2)
• Sampling Rate (per Second): 400MSa/s
• Input Impedance: 1M - 19pF
• Rise Time (typ): 5.83nS
• Voltage - Input, Max: 400Vpeak
• Voltage - Supply: 100 ~ 240VAC
• Lead Free Status / RoHS Status: Not applicable / Not applicable

Roll Horizontal Mode
Roll mode causes the waveform to move slowly across the
screen from right to left. It only operates on time base
settings of 500 ms/div or slower. If the current time base
setting is faster than the 500 ms/div limit, it will be set to
500ms/div when Roll mode is selected.
In Roll mode there is no trigger. The fixed reference point on
the screen is the right edge of the screen and refers to the
current moment in time. Events that have occurred are
scrolled to the left of the reference point. Since there is no
trigger, no pre-trigger information is available.
If you would like to pause the display in Roll mode, press the
SINGLE key. To clear the display and restart an acquisition
in Roll mode, press the SINGLE key again.
Use Roll mode on low-frequency waveforms to yield a display
much like a strip chart recorder. The waveform will “roll”
across the display.
Press the horizontal MENU key and then press the Roll
softkey to select the Roll mode. The waveform moves slowly
across the screen from right to left.
Basic Operation
51
52
Basic Operation
Roll Horizontal Mode