FLUKE-87-5-EX Fluke Electronics, FLUKE-87-5-EX Datasheet - Page 26
![no-image](/images/no-image-200.jpg)
FLUKE-87-5-EX
Manufacturer Part Number
FLUKE-87-5-EX
Description
MULTIMETER INDUSTRIAL TRU RMS
Manufacturer
Fluke Electronics
Series
8xr
Type
Digital (DMM)r
Specifications of FLUKE-87-5-EX
Includes
Battery, Clips, Temperature Probe, Test Leads
Style
Handheld
Display Digits
4.5
Display Type
LCD, Bar Graph
Display Count
20000
Function
Voltage, Current, Resistance, Capacitance, Temperature, Frequency
Functions, Extra
Continuity, Diode Test
Features
Auto Off, Backlight, Clips, Hold, Min/Max/Ave
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
2547226
Users Manual
Measuring Temperature
The Meter measures the temperature of a type-K
thermocouple (included). Choose between degrees
Celsius ( C) or degrees Fahrenheit ( F) by pushing C.
Display ranges are –200.0 C to +1090.0 C and
–328.0 F to 1994.0 F. Readings outside of these ranges
show OL on the Meter display. When there is no
thermocouple connected, the display also reads OL.
To measure temperature, do the following:
1.
2.
3.
4.
18
To avoid possible damage to the Meter or
other equipment, remember that while the
Meter is rated for –200.0 C to +1090.0 C and
–328.0 F to 1994.0 F, the included K-Type
Thermocouple is rated to 260 C.
Connect a type-K thermocouple to the Meter’s COM
and dV eG terminals.
Turn the rotary switch to
Press A to enter temperature mode.
Push C to choose Celsius or Fahrenheit.
W Caution
M
.
Testing for Continuity
The continuity test features a beeper that sounds as long
as a circuit is complete. The beeper allows you to perform
quick continuity tests without having to watch the display.
To test for continuity, set up the Meter as shown in
Figure 4.
Press Eto turn the continuity beeper on or off.
The continuity function detects intermittent opens and
shorts lasting as little as 1ms. A brief short causes the
Meter to emit a short beep.
To avoid possible damage to the Meter or to
the equipment under test, disconnect circuit
power and discharge all high-voltage
capacitors before testing for continuity.
WCaution