FLUKE-87-5-EX Fluke Electronics, FLUKE-87-5-EX Datasheet - Page 13
![no-image](/images/no-image-200.jpg)
FLUKE-87-5-EX
Manufacturer Part Number
FLUKE-87-5-EX
Description
MULTIMETER INDUSTRIAL TRU RMS
Manufacturer
Fluke Electronics
Series
8xr
Type
Digital (DMM)r
Specifications of FLUKE-87-5-EX
Includes
Battery, Clips, Temperature Probe, Test Leads
Style
Handheld
Display Digits
4.5
Display Type
LCD, Bar Graph
Display Count
20000
Function
Voltage, Current, Resistance, Capacitance, Temperature, Frequency
Functions, Extra
Continuity, Diode Test
Features
Auto Off, Backlight, Clips, Hold, Min/Max/Ave
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
2547226
To avoid possible damage to the Meter or to
the equipment under test, follow these
guidelines:
Do not use the Low Pass Filter option to
verify the presence of hazardous
voltages. Voltages greater than what is
indicated may be present. First, make a
voltage measurement without the filter to
detect the possible presence of
hazardous voltage. Then select the filter
function.
Do not use in wet environments.
Disconnect circuit power and discharge
all high-voltage capacitors before testing
resistance, continuity, diodes, or
capacitance.
Use the proper terminals, function, and
range for all measurements.
Before measuring current, check the
Meter's fuses. (See "Fuse Test".)
Observe all safety regulations and read
the certificate.
WCaution
Errors and Load Restrictions
If there is any question that the safety or integrity of this
Meter is compromised, remove it from operation and the
Ex-hazardous area immediately. Also, take whatever
actions are necessary to prevent the Meter from being
accidentally placed into operation before it can be
examined and approved for operation. It is recommended
the Meter be returned to the manufacturer for
examination.
The safety and reliability of the Meter may be at risk and
discontinue use of the Meter if:
Visible damage is evident on the Meter’s housing.
The Meter has been subjected to excessive loads for
The Meter has been improperly stored.
The Meter has sustained damage in transit.
Illegible inscriptions or lettering appears on the Meter.
A Meter malfunction occurs.
Obvious measuring inaccuracies occur.
Measurements/simulations are no longer possible with
Permitted tolerances or threshold values have been
which it is not designed.
the Meter.
exceeded.
ATEX Safety Information
True-rms Multimeter
5