FLUKE-87-5-EX Fluke Electronics, FLUKE-87-5-EX Datasheet - Page 12
![no-image](/images/no-image-200.jpg)
FLUKE-87-5-EX
Manufacturer Part Number
FLUKE-87-5-EX
Description
MULTIMETER INDUSTRIAL TRU RMS
Manufacturer
Fluke Electronics
Series
8xr
Type
Digital (DMM)r
Specifications of FLUKE-87-5-EX
Includes
Battery, Clips, Temperature Probe, Test Leads
Style
Handheld
Display Digits
4.5
Display Type
LCD, Bar Graph
Display Count
20000
Function
Voltage, Current, Resistance, Capacitance, Temperature, Frequency
Functions, Extra
Continuity, Diode Test
Features
Auto Off, Backlight, Clips, Hold, Min/Max/Ave
Ranging
Auto/Manual
Response
True RMS
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
2547226
Users Manual
4
Ensure the battery door is closed and
latched whenever operating the Meter.
Replace the battery as soon as the
battery indicator (M) appears. See
“Replacing the Battery” section for
instructions and a list of approved
batteries.
Remove test leads from the Meter before
opening the battery door.
Inspect the test leads for damaged
insulation or exposed metal. Check the
test leads for continuity. Replace
damaged leads before using the Meter.
Do not apply more than the rated
voltage, as marked on the Meter,
between the terminals or between any
terminal and earth ground.
Use caution when working with voltages
above 30 V ac rms, 42 V ac peak, or 60 V
dc. These voltages pose a shock hazard.
Use only the replacement fuses specified
in this Users Manual. See “Replacing the
Fuses” section for instructions and a list
of approved fuses.
Use the proper terminals, function, and
range for measurements.
Avoid working alone.
When measuring current, turn off circuit
power before connecting the Meter to the
circuit. Remember to place the Meter in
series with the circuit.
When making electrical connections,
connect the common test lead before
connecting the live test lead; when
disconnecting, disconnect the live test
lead before disconnecting the common
test lead.
Do not use the Meter if it operates
abnormally. Protection may be impaired.
When in doubt, have the Meter serviced.
Use only a single 9 volt battery, properly
installed in the Meter case, to power the
Meter. See “Replacing the Battery”
section for instructions and a list of
approved batteries.
Only use replacement parts listed in the
“Parts” section of this manual. Return
the Meter to the manufacturer for all
other service needs.
When using probes, keep your
fingers behind the probe’s finger
guards.