KMA200,115 NXP Semiconductors, KMA200,115 Datasheet - Page 26

• Manufacturer Part Number: KMA200,115
• Description: IC SENSOR PROG ANGLE SOT637
• Manufacturer: NXP Semiconductors

Specifications of KMA200,115

• Position - Sensing: 180°
• Sensor Type: Angular - Magnetoresistive
• Voltage - Supply: 4.5 V ~ 5.5 V
• Operating Temperature: -40°C ~ 160°C
• Package / Case: SOT-637
• Supply Voltage (max): 5.5 V
• Supply Voltage (min): 4.5 V
• Supply Current: 12 mA
• Maximum Operating Temperature: + 160 C
• Minimum Operating Temperature: - 40 C
• Mounting Style: Through Hole
• Product: Programmable Angle Sensor
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: 568-4286-2; 934056510115; KMA200 T/R

NXP Semiconductors
14. ElectroMagnetic Interference (EMI)
15. ElectroStatic Discharge (ESD)
16. Terminals
KMA200_7
Product data sheet
14.1 Emission (CISPR 25)
14.2 Radiated disturbances (ISO 11452-2, ISO 11452-5)
14.3 Transients - pulses (ISO 7637-1, ISO 7637-3)
15.1 Human body model
15.2 Machine model
The following tests are performed with the sensor system KMA200. Details of the
measurements and behavior are available on request.
Conducted radio disturbance: tests according CISPR 25, chapter 11 (artificial network).
Radiated radio disturbance: test according CISPR 25, chapter 13 (anechoic chamber -
component/module).
Immunity against mobile phones and Absorber Lined Chamber and Strip line (ALCS);
strip line measurements are performed up to 1 GHz.
Galvanic: line conducted pulses on the supply lines according ISO 7637-1 pulses 1, 2, 3a,
3b, 4 and 5 (for pulse no. 5 a suitable protection circuit must be used).
Coupled: transient transmission by capacitive and inductive coupling via lines other than
supply lines (interface, analog output) according ISO 7637-3 pulses 3a and 3b.
The KMA200 must not be damaged at 4000 V, 100 pF, 1.5 k to the human body model.
The test is according to MIL-STD-883D method 3015.7. This protection must be ensured
at all external pins (CLK/OUT2, CS and DATA/OUT1) including device supply (V
For the interconnects (pins between upper and lower package part), the protection is up to
1500 V.
The KMA200 must not be damaged at 400 V to the machine model. The test is according
to MIL-STD-883D method 3015.7. This protection must be ensured at all external pins
(CLK/OUT2, CS and DATA/OUT1) including device supply (V
interconnects (pins between upper and lower package part), the protection is up to 100 V.
Device terminals shall be compatible with laser welding and electrical welding.
Lead frame material: CuZr with 0.1 % Zr, 99.9 % Cu
Lead finish: pure tin, 8 m
Rev. 07 — 18 July 2008
thickness
13 m
Programmable angle sensor
DD
, GND). For the
© NXP B.V. 2008. All rights reserved.
KMA200
DD
, GND).
26 of 32