MTCBA-G2-EN2-GP Multi-Tech Systems, MTCBA-G2-EN2-GP Datasheet - Page 40

• Manufacturer Part Number: MTCBA-G2-EN2-GP
• Description: ROUTER WIRELESS QUAD GPRS GPS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-G2-EN2-GP

• Function: Transceiver, GPRS, Router
• Modulation Or Protocol: GSM, GPRS
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz, 1575.42MHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Sensitivity: -161dB
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1087

Chapter 4 – Using the Web Management Software
Networks & Services
N etworks & Services > Network Configuration
8 7 B
Networks or Hosts can be added here. The options to Delete or Edit a network after it has been defined and added are available
by using the table at the bottom of the screen.
40
Network Configuration
Enter the Name, IP Address, and Mask for a new Network or Host.
Notes:
Name:
IP Address:
Subnet Mask:
Add Button:
●
●
●
●
A Network/Host Name cannot be edited.
A Network/Host cannot be deleted if it is used in another configuration.
Network/Host changes are reflected in all the configurations in the Web Management software where they are
used.
A Network/Host added here will be displayed in the following sections: Static Routes, DNAT, and Packet Filters.
Enter the name of the Network/Host. The same address-mask pair should not already be present
in the displayed list. The Name is limited to 15 characters maximum.
Enter the IP Address of the Network/Host. The same address-mask pair should not already be
present in the displayed list.
Enter the Network Mask of the Network/Host. For Host addresses, the mask is entered as 32.
Note:
Click the Add button. The defined network is added and will display at the bottom of the screen.
See Appendix A -- Table of Commonly Supported Subnets.
Multi-Tech Systems, Inc. MultiModem rCell User Guide