MTCBA-G2-EN2-GP Multi-Tech Systems, MTCBA-G2-EN2-GP Datasheet - Page 34

• Manufacturer Part Number: MTCBA-G2-EN2-GP
• Description: ROUTER WIRELESS QUAD GPRS GPS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-G2-EN2-GP

• Function: Transceiver, GPRS, Router
• Modulation Or Protocol: GSM, GPRS
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz, 1575.42MHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Sensitivity: -161dB
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1087

Chapter 4 – Using the Web Management Software
PPP General
Authentication
ICMP Keep Alive Check
Modem Configuration
Submit Button
Click the Submit button to save these settings.
34
Note:
changes.
PPP
Dial-on-Demand:
Idle Time Out:
Connect Time Out:
Dialing Max Retries:
Authentication Type:
Username:
Password:
Keep Alive Check:
Keep Alive Type:
Host Name:
TCP Port:
Interval:
ICMP Count:
Dial Number:
Dial Prefix:
Connect String:
APN:
Init String 1-4:
Baud Rate:
You must click Save and Restart once you have completed and submitted all the screens on which you have made
Note:
the fly at runtime.
For routing to take effect, the configuration must be saved after enabling it. It won’t be effective on
Enable/disable PPP. The default is Disable. When enabled, the unit functions as a router. PPP
must be disabled to access the integrated cellular modem directly using telnet port 5000. If
PPP is enabled, you cannot access the integrated cellular modem.
Enable/disable Dial-on-Demand. The default is Disable. If you disable it, the router will always
stay connected unless the Idle Time Out expires. When Dial-on-Demand is enabled, use the
‘Wakeup on Call’ settings under the PPP menu to configure the settings for re-establishment
of the connection.
Set the amount of idle time that will pass before the router will timeout. The default is 180
seconds. If the time expires, the PPP connection to the Internet will disconnect. Any IP
packets from the LAN side or IP traffic from the wireless side will reset this timer and prevent
the connection from dropping.
Set the number of seconds to wait for a connection while in receive mode before timing out.
Enter the number of dialing retries allowed. The default is zero, which means an infinite
number is allowed. Range 0 to 100.
Set the authentication protocol type that will negotiate with the remote peer: pap/chap/pap-
chap. Default is pap-chap.
Enter the Username with which the remote peer will authenticate. You can leave this field
blank, if desired. Username is limited to 60 characters.
Enter the Password with which the remote peer will authenticate. You can leave this field
blank, if desired. Password is limited to 60 characters.
Enable/disable Keep Alive Check. The default is Disable. This is used to periodically check
that the Internet connection is up. If it is not, the router will try to reconnect.
Select ICMP or TCP (the protocol type for Keep Alive).
Enter the Host Name or IP Address for Keep Alive Check. No default.
Enter the TCP Port number to connect with the TCP server.
Set the number of seconds for Keep Alive Check. Default is 60 seconds.
Set the number of ICMP Keep Alive Checks to be sent to the specified host. Default is 10.
(Refer to the Customer Activation Notices included with the product for proper information to
enter).
Set the dial number to be dialed. Default is NULL.
Set the modem dial prefix. The default is ATDT.
Set the modem Connect String. The default is CONNECT.
Configure the modem init strings. You can set up to 4 modem initialization strings.
The Baud Rate option is only displayed on certain models and is set at 230.4K, by default.
The default setting is set for maximum performance. Setting the baud rate higher, particularly
on the G2 models, is not recommended as it may adversely affect the performance.
Enter the APN (Access Point Name). The APN is assigned by your wireless service provider.
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
Multi-Tech Systems, Inc. MultiModem rCell User Guide