MTCBA-G2-EN2-GP Multi-Tech Systems, MTCBA-G2-EN2-GP Datasheet - Page 37

• Manufacturer Part Number: MTCBA-G2-EN2-GP
• Description: ROUTER WIRELESS QUAD GPRS GPS
• Manufacturer: Multi-Tech Systems
• Series: MultiModem® rCellr

Specifications of MTCBA-G2-EN2-GP

• Function: Transceiver, GPRS, Router
• Modulation Or Protocol: GSM, GPRS
• Frequency: 850MHz, 900MHz, 1.8GHz, 1.9GHz, 1575.42MHz
• Applications: General Purpose
• Interface: RJ-45, RS-232
• Sensitivity: -161dB
• Voltage - Supply: 9 V ~ 32 V
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 881-1087

Example 2 – Determine if the router Is Supporting Incoming Calls and Caller ID
Example 3 – Set Up the Ethernet Router to Activate on ALL Incoming Calls
Example 4 – Set Up the Ethernet Router to Activate on Matching Caller IDs Only:
Multi-Tech Systems, Inc. MultiModem rCell User Guide
1.
2.
3.
4.
5.
6.
7.
1.
2.
3.
1.
On the PPP > PPP Configuration screen, make sure that PPP is Disabled.
On the PPP > Wakeup-on-Call screen, make sure that Wakeup-on-Call is Disabled.
Open a command prompt by clicking the Start button and selecting Run.
Type CMD to open the command window. Click OK.
When the command window opens, telnet to the router.
From another phone, call your router using the number identified in Step 5.3. This will let you know if the RING
message shows.
To enable Caller ID, enter the AT+CLIP=1 command on the command screen and make the call again to see if it
shows Caller ID information.
Notes:
Save and Restart
On the
On the
On the
PPP General
Authentication
Modem Configuration
Submit
Wakeup-on-Call Configuration
Caller ID Configuration
Click Save and Restart once you have completed and submitted all the screens on which you have made
Note:
●
●
changes. The device will save all the settings and reboot the PC.
PPP General
Authentication
Modem Configuration
Step 5.3 must show the RING or CALLER ID information in order for the Wakeup-on-Call function to work.
Some wireless providers might not provide caller ID information if you have only a data plan.
PPP > PPP Configuration
PPP >PPP Configuration
PPP > Wakeup-on-Call
Note:
5000 is the router port number.
●
●
●
●
●
●
●
●
●
●
●
●
5.1.
5.2.Enter an AT command to make sure you receive a response; i.e., OK.
5.3.Enter the Command AT+CNUM to determine the dial number of your router.
●
●
●
●
●
you activated your account.
Note:
when you activated your account.
If a username and password are required, your wireless provider would have given them to you when
Enter your username and password to login.
Make sure that PPP is Enabled.
Make sure Dial-on-Demand is Enabled.
Set the Idle Time Out to the number of seconds you desire.
Your wireless service provider may require you to have a separate PPP Use name and Password. If so,
enter them here.
Make sure your Dial Number is entered correctly:
Click the Submit button to save the changes made on this screen.
Select Enable for Wakeup-on-Call.
Set the Time Delay to 3 seconds. You can use the 10 second default.
All Init Strings should be empty.
Submit Button
Click the Submit button to save these settings.
Enter the string RING to the Caller ID list.
Click the Add Button to save the string to the Caller ID list.
Make sure that PPP is Enabled.
Make sure Dial-on-Demand is Enabled.
Set the Idle Time Out to the number of seconds you desire.
Your wireless service provider may require you to have a separate PPP username and password. If so,
enter them here.
Make sure your Dial Number is entered correctly:
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
If a username and password are required, your wireless provider would have given them to you
For GSM models, the Dial Number is *99***1#
For CDMA models, the Dial Number is #777
screen, set up the following parameters:
screen, set up the following parameters:
screen, set up the following parameters:
Chapter 4 – Using the Web Management Software
37