ATA6603-EK Atmel, ATA6603-EK Datasheet - Page 103

• Manufacturer Part Number: ATA6603-EK
• Description: MCU, MPU & DSP Development Tools Demoboard LIN-MCM
• Manufacturer: Atmel

Specifications of ATA6603-EK

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

4921E–AUTO–09/09
• T1/OC0B/PCINT21 – Port D, Bit 5
• XCK/T0/PCINT20 – Port D, Bit 4
• INT1/OC2B/PCINT19 – Port D, Bit 3
• INT0/PCINT18 – Port D, Bit 2
• TXD/PCINT17 – Port D, Bit 1
• RXD/PCINT16 – Port D, Bit 0
T1, Timer/Counter1 counter source.
OC0B, Output Compare Match output: The PD5 pin can serve as an external output for the
Timer/Counter0 Compare Match B. The PD5 pin has to be configured as an output (DDD5
set (one)) to serve this function. The OC0B pin is also the output pin for the PWM mode
timer function.
PCINT21: Pin Change Interrupt source 21. The PD5 pin can serve as an external interrupt
source.
XCK, USART external clock.
T0, Timer/Counter0 counter source.
PCINT20: Pin Change Interrupt source 20. The PD4 pin can serve as an external interrupt
source.
INT1, External Interrupt source 1: The PD3 pin can serve as an external interrupt source.
OC2B, Output Compare Match output: The PD3 pin can serve as an external output for the
Timer/Counter0 Compare Match B. The PD3 pin has to be configured as an output (DDD3
set (one)) to serve this function. The OC2B pin is also the output pin for the PWM mode
timer function.
PCINT19: Pin Change Interrupt source 19. The PD3 pin can serve as an external interrupt
source.
INT0, External Interrupt source 0: The PD2 pin can serve as an external interrupt source.
PCINT18: Pin Change Interrupt source 18. The PD2 pin can serve as an external interrupt
source.
TXD, Transmit Data (Data output pin for the USART). When the USART Transmitter is
enabled, this pin is configured as an output regardless of the value of DDD1.
PCINT17: Pin Change Interrupt source 17. The PD1 pin can serve as an external interrupt
source.
RXD, Receive Data (Data input pin for the USART). When the USART Receiver is enabled
this pin is configured as an input regardless of the value of DDD0. When the USART forces
this pin to be an input, the pull-up can still be controlled by the PORTD0 bit.
PCINT16: Pin Change Interrupt source 16. The PD0 pin can serve as an external interrupt
source.
ATA6602/ATA6603
103