GP1UF310XP0F Sharp Microelectronics, GP1UF310XP0F Datasheet - Page 7

• Manufacturer Part Number: GP1UF310XP0F
• Description: Infrared Receivers IR Remote Receiver 2.7-5.5V 35Khz
• Manufacturer: Sharp Microelectronics

Specifications of GP1UF310XP0F

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Fig. 5. Device Connection
GP1UF31YP0F-3
■ Manufacturing Guidelines
● Storage and Handling
1. Moisture-proofing: These parts are shipped in vacuum-sealed packaging to keep them dry and ready for use.
2. Store these parts between 10°C and 30°C, at a relative humidity of less than 70%, for up to a year.
3. After breaking the package seal, maintain the environment within 10°C to 30°C, at a relative humidity of less
4. If the parts will not be used immediately, repack them in a dry box, or re-vacuum-seal them with a desiccant.
5. If the parts are exposed to air for more than 3 days, if there are more than 3 days between reflow operations, or
to room temperature after baking.
Note that the reels will become distorted if they are in a stack when baking. Confirm that the parts have cooled
than 70%. Solder the parts within 3 days.
Store them as above, but since the seal has been broken, the parts must be used within 4 weeks.
if the silica gel telltale indicates moisture contamination, bake the parts only once:
• When in the tape carrier, bake them at a temperature of 65°C for 48 hours.
• When loose on a metal tray or on a PCB, bake them at a temperature of 100°C to 110°C, for 12 to 24 hours.
Temporary mounting on a PCB must be using an adhesive and not by soldering.
GND
1
GND
C
2
NC
3
NC
Vout
4
Vout
Vcc
5
Vcc
R
6
NC
Preliminary
7
SGND
7
GP1UF31xYP0F Series
Sheet No.: OP06Y11A
March 2009