HFBR-57M5AP Avago Technologies US Inc., HFBR-57M5AP Datasheet - Page 12

• Manufacturer Part Number: HFBR-57M5AP
• Description: Fiber Optic Transmitters, Receivers, Transceivers 2/1 GBd FC SFP DMI B ail delatch
• Manufacturer: Avago Technologies US Inc.

Specifications of HFBR-57M5AP

• Function: Supports high-speed serial links over multimode optical fiber at signaling rates up to 2.125 GBd.
• Product: Transceiver
• Data Rate: 2.125 GBd, 1.0625 GBd, 1.25 GBd
• Wavelength: 850 nm
• Maximum Rise Time: 250 ps, 150 ps
• Maximum Fall Time: 250 ps, 150 ps
• Pulse Width Distortion: 0.12 ns, 0.123 ns
• Operating Supply Voltage: 2.97 V to 3.63 V
• Maximum Operating Temperature: + 75 C
• Minimum Operating Temperature: - 10 C
• Package / Case: SFP-20
• Optical Fiber Type: TX/RX
• Data Transfer Rate: 2125Mbps
• Optical Rise Time: 0.15/0.25ns
• Optical Fall Time: 0.15/0.25ns
• Jitter: 0.12/0.123ns
• Operating Temperature Classification: Commercial
• Peak Wavelength: 860nm
• Package Type: SFP
• Operating Supply Voltage (min): 2.97V
• Operating Supply Voltage (typ): 3.3V
• Operating Supply Voltage (max): 3.63V
• Operating Temp Range: -10C to 75C
• Mounting: Snap Fit To Panel
• Pin Count: 20
• For Use With: Multimode Glass
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Figure 5. Transceiver Timing Diagrams (Module Installed except where noted)
12
t-fault: TX DISABLE ASSERTED THEN NEGATED,
TX SIGNAL NOT RECOVERED
t-init: TX DISABLE NEGATED
t-init: TX DISABLE NEGATED, MODULE HOT PLUGGED
t-fault: TX FAULT ASSERTED, TX SIGNAL NOT RECOVERED
* SFP SHALL CLEAR Tx_FAULT IN
t_init IF THE FAILURE IS TRANSIENT
TRANSMITTED SIGNAL
TRANSMITTED SIGNAL
OCCURANCE OF FAULT
TRANSMITTED SIGNAL
TRANSMITTED SIGNAL
OCCURANCE OF FAULT
V
Tx_DISABLE
V
Tx_DISABLE
CC
Tx_DISABLE
CC
Tx_FAULT
Tx_DISABLE
Tx_FAULT
Tx_FAULT
> 2.97 V
Tx_FAULT
> 2.97 V
INSERTION
t_reset
t_init
t_init
t_fault
t_fault
t_init*
t-loss-on & t-loss-off
t-reset: TX DISABLE ASSERTED THEN NEGATED, TX SIGNAL RECOVERED
t-init: TX DISABLE ASSERTED
t-off & t-on: TX DISABLE ASSERTED THEN NEGATED
* CANNOT READ INPUT...
TRANSMITTED SIGNAL
TRANSMITTED SIGNAL
TRANSMITTED SIGNAL
OCCURANCE OF FAULT
OPTICAL SIGNAL
V
Tx_DISABLE
Tx_DISABLE
CC
Tx_DISABLE
Tx_FAULT
Tx_FAULT
Tx_FAULT
> 2.97 V
LOS
t_loss_on
t_off
t_reset
OCCURANCE
OF LOSS
t_init
t_init*
t_on
t_loss_off