PN5120A0HN/C1,518 NXP Semiconductors, PN5120A0HN/C1,518 Datasheet - Page 39

• Manufacturer Part Number: PN5120A0HN/C1,518
• Description: IC TRANSMISSION MOD 40-HVQFN
• Manufacturer: NXP Semiconductors

Specifications of PN5120A0HN/C1,518

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443-A, ISO14443-B
• Package / Case: 40-VFQFN Exposed Pad
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NXP Semiconductors
PN512
Product data sheet
COMPANY PUBLIC
Table 59.
Bit
3 to 0
Symbol
SigOutSel
Description of TxSelReg bits
All information provided in this document is subject to legal disclaimers.
Description
Value
0000
0001
0010
0011
0100
0101
0110
0111
1000-1011 FeliCa Sam modulation
1100-1111
Selects the input for the SIGOUT Pin.
Rev. 3.6 — 10 March 2011
111336
Description
Tristate
Low
High
TestBus signal as defined by bit TestBusBitSel in register
TestSel1Reg.
Modulation signal (envelope) from the internal coder
Serial data stream to be transmitted
Output signal of the receiver circuit (card modulation signal
regenerated and delayed). This signal is used as data output
signal for SAM interface connection using 3 lines.
Note: To have a valid signal the PN512 has to be set to the
receiving mode by either the Transceive or Receive
command. The bit RxMultiple can be used to keep the PN512
in receiving mode.
Note: Do not use this setting in MIFARE mode. Manchester
coding as data collisions will not be transmitted on the
SIGOUT line.
Serial data stream received.
Note: Do not use this setting in MIFARE mode. Miller coding
parameters as the bit length can vary.
Note: * To have a valid signal the PN512 has to be set to the
receiving mode by either the Transceive or Receive
command. The bit RxMultiple can be used to keep the PN512
in receiving mode.
MIFARE Sam modulation
Note: *To have a valid signal the PN512 has to be set to the
receiving mode by either the Transceive or Receive
command. The bit RxMultiple can be used to keep the PN512
in receiving mode.
1000 RX*
1001 TX
1010 Demodulator comparator output
1011 RFU
1100 RX* with RF carrier
1101 TX with RF carrier
1110 RX with RF carrier un-filtered
1111 RX envelope un-filtered
…continued
Transmission module
© NXP B.V. 2011. All rights reserved.
PN512
39 of 125