SK-TSC-1127-SB Fujitsu, SK-TSC-1127-SB Datasheet - Page 6

• Manufacturer Part Number: SK-TSC-1127-SB
• Description: KIT, STARTER, TOUCH CNTRL, FMA1127
• Manufacturer: Fujitsu
• Type: Starter Kitr

Specifications of SK-TSC-1127-SB

• Mcu Supported Families: FMA1127
• Tool / Board Applications: Touch Sensor Controller
• Silicon Manufacturer: Fujitsu
• Kit Contents: SK-TSC-1127S-SB Touch Board, ADA-16FX-TSC-LCD, 10-pin Ribbon Cable, 3x FMA1127DC-30S Sample
• Features: 10-pin Connector For I2C And Interrupt Signals, Pin
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1.2 Features
< FMA1127DC-30S Touch Sensor Controller (SOP30 package) with 12 touch input
< Slider (eight elements)
< Four buttons
< Six LEDs
< 10-pin connector for I2C and interrupt signals, pin compatible with EVALB1127 Tuning
< Completely flat front surface for easy mounting to different front panels
< Adapter board (ADA-16FX-TSC-LCD) to connect to SK-16FX-EUROSCOPE (SK-16FX-
< Connector for parallel LC Display (on ADA-16FX-TSC-LCD)
< 3.3-5V operation
1.3 General Description
The SK-TSC-1127-SB is a starter kit and evaluation system for the FMA1127 Touch Sensor
Controller (TSC). It features a slider consisting of eight capacitive touch elements as well as
four single buttons. The kit uses an SK-16FX-EUROSCOPE Starter Kit (to be ordered
separately) holding the 16FX MB96F348 MCU as host platform, so that the user can easily
develop TSC applications using the EUROSCOPE debugging environment. Alternatively, the
touch board can be connected to the EVALB1127 TSC Tuning Kit (to be ordered
separately). The TSC touch board is connected using a 10-pole ribbon cable which holds the
power supply lines, the I2C connection as well as reset- and interrupt lines. It can be
connected either to the Starter Kit using the included adapter board (ADA-16FX-TSC-LCD)
or to the TSC Tuning Kit EVALB1127.
A demo firmware which also supports parameter tuning using a PC terminal program can be
downloaded from the web. In this demo application, the raw touch data of the slider
elements is read by the MCU, which then performs an interpolation algorithm to increase the
absolute position resolution. The buttons are directly read using the APIS mode I of the TSC.
As soon as the slider or one of the four buttons is touched, the two 7-segment LED displays
on the SK-16FX-EUROSCOPE will indicate either the slider position (from 0-99) or the
number of the touched button (Display: “b.1” – “b.4”).
Additionally, a standard parallel LCD (20x4) can be connected to the ADA-16FX-TSC-LCD.
When the LCD is present, in addition to the slider position and the pressed buttons, the
demo firmware shows the distribution of the touch strength among the slider elements on the
LCD as soon as the slider is touched.
channels and 6 digital I/Os
Kit
EUROSCOPE not included)
SK-TSC-1127-SB User Guide
- 6 -
© Fujitsu Microelectronics Europe GmbH