SK-TSC-1127-SB Fujitsu, SK-TSC-1127-SB Datasheet - Page 11

• Manufacturer Part Number: SK-TSC-1127-SB
• Description: KIT, STARTER, TOUCH CNTRL, FMA1127
• Manufacturer: Fujitsu
• Type: Starter Kitr

Specifications of SK-TSC-1127-SB

• Mcu Supported Families: FMA1127
• Tool / Board Applications: Touch Sensor Controller
• Silicon Manufacturer: Fujitsu
• Kit Contents: SK-TSC-1127S-SB Touch Board, ADA-16FX-TSC-LCD, 10-pin Ribbon Cable, 3x FMA1127DC-30S Sample
• Features: 10-pin Connector For I2C And Interrupt Signals, Pin
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

2.4 Jumper settings
2.4.1 SK-TSC-1127S-SB
JP6 and JP8 can be used e.g. to identify different touch boards by the host SW by checking
the level on X1 Pin 9 and Pin10.
In most cases, the default settings will not have to be changed.
© Fujitsu Microelectronics Europe GmbH
(SDA pull-up)
(SCL pull-up)
(TP int/ext)
(LED VCC)
(reserved)
(reserved)
Jumper
(GINT)
(TINT)
(LDO)
JP14
JP1
JP2
JP3
JP4
JP5
JP6
JP7
(ID)
JP8
JP9
Setting
Closed
Closed
Closed
Closed
Closed
Closed
Open
Open
Open
Open
Open
Open
Open
Open
1-2
2-3
1-2
2-3
1-2
2-3
1-2
2-3
SK-TSC-1127-SB User Guide
Description
LEDs not connected to VCC
LEDs connected to VCC
I2C SCL line not connected to Pull-up resistor
I2C SCL line connected to Pull-up resistor
I2C SDA line not connected to Pull-up resistor
I2C SDA line connected to Pull-up resistor
TINT not connected to X1
TINT connected to X1
GINT not connected to X1
GINT connected to X1
X1 Pin9 not connected
X1 Pin9 connected to VCC (pull-up)
X1 Pin9 connected to GND (pull-down)
Chip ID = 0x58
Chip ID = 0x5B
X1 Pin10 not connected
X1 Pin10 connected to VCC (pull-up)
X1 Pin10 connected to GND (pull-down)
Internal LDO not connected
Internal logic supplied by internal LDO
Use on-board touch pad S11
Use external electrode connected to TP4
- 11 -