SK-TSC-1127-SB Fujitsu, SK-TSC-1127-SB Datasheet - Page 5

• Manufacturer Part Number: SK-TSC-1127-SB
• Description: KIT, STARTER, TOUCH CNTRL, FMA1127
• Manufacturer: Fujitsu
• Type: Starter Kitr

Specifications of SK-TSC-1127-SB

• Mcu Supported Families: FMA1127
• Tool / Board Applications: Touch Sensor Controller
• Silicon Manufacturer: Fujitsu
• Kit Contents: SK-TSC-1127S-SB Touch Board, ADA-16FX-TSC-LCD, 10-pin Ribbon Cable, 3x FMA1127DC-30S Sample
• Features: 10-pin Connector For I2C And Interrupt Signals, Pin
• Rohs Compliant: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

1 Overview
1.1 Abstract
The SK-TSC-1127-SB Starter Kit allows easy evaluation of the FMA1127 Touch Sensor
Controller. It consists of the following parts:
A demo firmware allows direct evaluation of the touch sensor, and provides various
commands to tune the TSC parameters using a command-line interface and a terminal
program. The newest version of the demo firmware, the SK-Wizard (the recommended
terminal program) and additional information can be downloaded from the TSC product
page:
This manual will describe the behaviour when used with the above demo firmware where
needed (e.g. tuning with command line interface). Of course the Starter Kit itself can also be
used with different host software and / or hardware combinations.
© Fujitsu Microelectronics Europe GmbH
This evaluation system must only be used for test applications
•
•
•
•
•
1x SK-TSC-1127S-SB touch board with FMA1127, 1 slider + 4 buttons, six LEDs
1x ADA-16FX-TSC-LCD
1x 10-pin ribbon cable
3x FMA1127DC-30S Sample
The Kit requires an SK-16FX-EUROSCOPE Starter Kit as host PCB which has
be ordered separately. Alternatively, the Touch Board (SK-TSC-1127S-SB) can
be used with the TSC Tuning Kit EVALB1127 (sold separately)
http://www.fujitsu.com/emea/services/microelectronics/tsc/
in an evaluation laboratory environment!
SK-TSC-1127-SB User Guide
- 5 -