HFBR-0562 Avago Technologies US Inc., HFBR-0562 Datasheet - Page 11
![Fiber Optics, Evaluation Kit](/photos/37/14/371435/5968-9719e_sml.jpg)
HFBR-0562
Manufacturer Part Number
HFBR-0562
Description
Fiber Optics, Evaluation Kit
Manufacturer
Avago Technologies US Inc.
Specifications of HFBR-0562
Silicon Manufacturer
Avago
Silicon Core Number
HFBR-591xE, HFCT-591xE
Kit Application Type
Communication & Networking
Application Sub Type
MT-RJ Gigabit Ethernet Transceiver
Main Purpose
Interface, Ethernet
Embedded
No
Utilized Ic / Part
HFCT-591xE, HFBR-591xE
Primary Attributes
MT-RJ 1.25Gb Multimode Applications
Secondary Attributes
MT-RJ Fiber Connector Interface
Description/function
Fiber Optic Kit
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With/related Products
HFBR-591x
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Contains lead / RoHS non-compliant
11
Figure 11. HFBR-591xE open air radiation
Figure 12. HFBR-591xE simulated chassis radiation
Handling
Process Plug
The HFBR-591xE and HFCT-591xE
SFF transceivers are supplied with a
process plug for protection of optical
ports. This process plug prevents
contamination during solder and
aqueous rinse as well as during
handling, shipping or storage. It is
made of high temperature, moulded
material containing an insert that
forms a seal around the optical port.
The multimode (black) and single
mode process plugs (blue) are not
inter changeable. The process plug is
capable of withstanding +80° C and
a rinse pressure of 110 psi.
Optical Path Cleanliness
To ensure optimum product per-
formance, the optical light path
must not be obscured by any con-
tamination. The following cleaning
procedure is suggested:
1) Use a nitrogen air gun, or similar,
2) Use a nitrogen air gun, or similar,
to blow clean the MT ferrule inside
the housing each time before
inserting the MT-RJ patchcord.
to blow clean the MT ferrule in
the MT-RJ patchcord each time
before mating with the module
or another patchcord.
3) Wipe the ferrule gently with IPA
4) Use a nitrogen air gun, or similar,
5) Put modules and patchcords
6) Use the modules process plug
Recommended Solder Fluxes and
Cleaning/Degreasing Chemicals
Solder fluxes used with the SFF
fiber optic transceiver should be
water-soluble, organic solder fluxes.
Some recommended solder fluxes
are Lonco 3355-11 from London
Chemical West, Inc. of Burbank, CA
and 100 Flux from Alpha metals of
Jersey City, NJ.
Recommended cleaning and de-
greasing chemicals for the SFF are
alcohol’s (methyl, isopropyl, isobutyl)
and aliphates (hexane, heptane).
Do not use partially halogenated
hydrocarbons for cleaning/degreas-
ing. Examples of chemicals to avoid
are 1.1.1 trichloroethane, ketones
(such as MEK), acetate, chloroform,
ethyl acetate, methylene dichloride,
phenaol, methylene chloride or N-
methylpyrolldone.
Thermal Analysis/Considerations
The HFCT-591xE single mode SFF
transceiver consumes a typical 600
mW of power. The case temperature
is approximately +5° C higher than
ambient temperature and the metal
shield of the transceiver enables
efficient power dissipation.
using lint free material no less
than once every 25 matings.
to blow clean the ferrule each
time after wiping the ferrule with
HFE 7100 to ensure that no debris
is left on the MT endface.
on a dry and clean surface
after
contamination.
and the patchcords dust cap
whenever they are not in use.
demating
to
avoid