AFCT-711XPDZ Avago Technologies US Inc., AFCT-711XPDZ Datasheet - Page 14

• Manufacturer Part Number: AFCT-711XPDZ
• Description: NORA XFP 2km OC-192 0-70
• Manufacturer: Avago Technologies US Inc.

Specifications of AFCT-711XPDZ

• Data Rate: 10.625Gbps
• Wavelength: 1310nm
• Applications: General Purpose
• Voltage - Supply: 3.135 V ~ 3.465 V
• Connector Type: LC Duplex
• Mounting Type: Panel Mount
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Application Support
An Evaluation Kit and Reference Designs are available to
assist in evaluation of the AFCT-711XPDZ. Please contact
your local Field Sales representative for availability and
ordering details.
Regulatory Compliance
The transceiver Regulatory Compliance performance
is provided in Table 2 as a figure of merit to assist the
designer. The overall equipment design will determine
the certification level.
Electrostatic Discharge (ESD)
There are two conditions in which immunity to ESD
damage is important. Table 2 documents the ESD
immunity to both of these conditions.
The first condition is static discharge to the transceiver
during handling such as when the transceiver is inserted
into the transceiver port. To protect the transceiver,
it is important to use normal ESD handling precau-
tions including the use of grounded wrist straps, work
benches, and floor mats in ESD controlled areas. The
ESD sensitivity of the AFCT-711XPDZ is compatible with
typical industry production environments.
Table 2. Regulatory Compliance
14
Feature
Electrostatic Discharge (ESD)
to the exterior of the XFP module
Electrostatic Discharge (ESD)
to the Optical Connector
Electrostatic Discharge (ESD)
to the Optical Connector
Electromagnetic Interference
(EMI)
Immunity
Laser Eye Safety and Equipment
Type Testing
Component Recognition
Test Method
JEDEC JESD22-A114-B
GR1089
Variation of IEC 801-2
FCC Class B
CENELEC EN55022 Class B
(CISPR 22A)
VCCI Class 1
Variation of IEC 61000-4-3
US FDA CDRH AEL Class 1
US21 CFR, Subchapter J per Paragraphs 1002.10 and
1002.12.
(IEC) EN60825-1: 1994 + A11+A2
(IEC) EN60825-2: 1994 + A1
(IEC) EN60950: 1992 + A1 + A2 + A3
+ A4 + A11
Underwriters Laboratories and Canadian Standards
Association Joint Component Recognition for Infor-
mation Technology Equipment Including Electrical
Business Equipment
The second condition is static discharge to the exterior
of the host equipment chassis after installation. To the
extent that the duplex LC optical interface is exposed
to the outside of the host equipment chassis, it may be
subject to system-level ESD requirements.
The ESD performance of the AFCT-711XPDZ exceeds
typical industry standards.
Immunity
The transceivers have a shielded design to provide
excellent immunity to radio-frequency electromagnetic
fields which may be present in some operating environ-
ments.
Electromagnetic Interference (EMI)
Most equipment designs using the AFCT-711XPDZ are
subject to the requirements of the FCC in the United
States, CENELEC EN55022 (CISPR 22) in Europe and VCCI
in Japan. The metal housing and shielded design of the
AFCT-711XPDZ minimizes EMI and provides excellent
EMI performance.
Performance
1000 Volts
10 discharges of both polarities of 8 KV on
the electrical faceplate with device inserted
into a panel.
Air discharge of 15 kV(min) contact to con-
nector w/o damage
System margins are dependent on customer
board and chassis design.
Less than 0.5 dB of Rx sensitivity degradation
and less than 10% margin reduction of Tx
mask at 10 V/m, 10 MHZ to 1 GHz w/o chassis
enclosure
CDRH certification # 9521220-100
TUV Certificate # R72071466
UL file # E173874