CV500II101 Omron, CV500II101 Datasheet - Page 15

• Manufacturer Part Number: CV500II101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500II101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

Programming Device
Restrictions
Connecting Programming Consoles
1-3
1-3-1 CVM1 and CV-series PCs
Connecting Programming Consoles
Note The DIP switch of the Unit to which the Programming Console is connected must
Note The SYSMAC-CPT does not support the CVM1D Duplex System.
It is possible to connect the Programming Console to any of the following:
Programming Devices cannot be connected to both the CPU Unit and an I/O
Interface Unit at the same time on the same PC. If more than one is connected,
only one, at most, will be operative. Refer to 1-3 Programming Devices Restric -
tions for details.
It is possible to connect a maximum of four Programming Devices to the same
PC, i.e., one to either the CPU Unit or I/O Interface Unit and up to three to SYS-
MAC BUS/2 Remote I/O Slave Units, or if one is not connected to the CPU Unit
or I/O Interface Unit, up to four to SYSMAC BUS/2 Remote I/O Slave Units. A
maximum of two Programming Consoles, however, can be connected to Slaves
under the same Remote I/O Master Unit.
be set to a baud rate of 50 kbps. The baud rate for the I/O Interface Unit is set on
the DIP switch on the CPU Unit.
The number of Programming Devices, including Programming Consoles and
personal computers running CVSS (CV Support Software), SSS (SYSMAC
Support Software), or SYSMAC-CPT (see note) must be within the following
limitations for any one PC.
CPU Unit
CV500-II201 I/O Interface Unit
SYSMAC BUS/2 Remote I/O
Sl
Slave Units
Maximum total
CV500, CV1000, CV2000, or CVM1 CPU Units.
CV500-II201 I/O Interface Units
SYSMAC BUS/2 Remote I/O Slave Units.
CVM1/CV500/CV1000/CV2000
I/O Interface
Unit
U i
Connection point
Expansion I/O Rack
Expansion I/O Rack
SYSMAC BUS/2 Remote I/O Master
SYSMAC
BUS/2
1
0
3
(2 max. per Master)
4
Maximum number of Programming Devices
Slave Rack
Slave Rack
Remote I/O Slave Unit
0
1
3
Remote I/O Slave Unit
CPU Unit
Section 1-3
0
4
3