CV500II101 Omron, CV500II101 Datasheet - Page 11

• Manufacturer Part Number: CV500II101
• Description: Programmable Logic Controller
• Manufacturer: Omron

Specifications of CV500II101

• Peak Reflow Compatible (260 C): No
• Leaded Process Compatible: No
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

4
5
Application Precautions
Operating Environment Precautions
Application Precautions
!
!
!
!
WARNING
!
Caution
Caution
Caution
Caution
Do not operate the control system in the following places:
Take appropriate and sufficient countermeasures when installing systems in the
following locations:
The operating environment of the PC System can have a large effect on the lon-
gevity and reliability of the system. Improper operating environments can lead to
malfunction, failure, and other unforeseeable problems with the PC System. Be
sure that the operating environment is within the specified conditions at installa-
tion and remains within the specified conditions during the life of the system.
Observe the following precautions when using the PC System.
Always heed these precautions. Failure to abide by the following precautions
could lead to serious or possibly fatal injury.
Failure to abide by the following precautions could lead to faulty operation of the
PC or the system, or could damage the PC or PC Units. Always heed these pre-
cautions.
Locations subject to direct sunlight.
Locations subject to temperatures outside the range 0 to 55 C.
Locations subject to humidity outside the range 10 to 90%.
Locations subject to condensation as the result of severe changes in tempera-
ture.
Locations subject to corrosive or flammable gases.
Locations subject to dust (especially iron dust) or salts.
Locations subject to exposure to water, oil, or chemicals.
Locations subject to shock or vibration.
Locations subject to static electricity or other forms of noise.
Locations subject to strong electromagnetic fields.
Locations subject to possible exposure to radioactivity.
Locations close to power supplies.
Always connect to a ground of 100
necting to a ground of 100
Always turn OFF the power supply to the PC before attempting any of the fol-
lowing. Not turning OFF the power supply may result in malfunction or electric
shock.
Fail-safe measures must be taken by the customer to ensure safety in the
event of incorrect, missing, or abnormal signals caused by broken signal lines,
momentary power interruptions, or other causes.
Mounting or dismounting Memory Cassettes.
Assembling the Units.
Setting switches.
Connecting or wiring the cables.
or less may result in electric shock.
or less when installing the Units. Not con-
xiii
5