DSPIC30F5015-20E/PT Microchip Technology, DSPIC30F5015-20E/PT Datasheet - Page 166

• Manufacturer Part Number: DSPIC30F5015-20E/PT
• Description: IC,DSP,16-BIT,CMOS,TQFP,64PIN,PLASTIC
• Manufacturer: Microchip Technology
• Series: dsPIC™ 30Fr

Specifications of DSPIC30F5015-20E/PT

• Rohs Compliant: YES
• Core Processor: dsPIC
• Core Size: 16-Bit
• Speed: 20 MIPS
• Connectivity: CAN, I²C, SPI, UART/USART
• Peripherals: Brown-out Detect/Reset, Motor Control PWM, QEI, POR, PWM, WDT
• Number Of I /o: 52
• Program Memory Size: 66KB (22K x 24)
• Program Memory Type: FLASH
• Eeprom Size: 1K x 8
• Ram Size: 2K x 8
• Voltage - Supply (vcc/vdd): 2.5 V ~ 5.5 V
• Data Converters: A/D 16x10b
• Oscillator Type: Internal
• Operating Temperature: -40°C ~ 125°C
• Package / Case: 64-TFQFP
• Package: 64TQFP
• Device Core: dsPIC
• Family Name: dsPIC30
• Maximum Speed: 20 MHz
• Operating Supply Voltage: 3.3|5 V
• Data Bus Width: 16 Bit
• Number Of Programmable I/os: 52
• Interface Type: CAN/I2C/SPI/UART
• On-chip Adc: 16-chx10-bit
• Number Of Timers: 5
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: AC30F008 - MODULE SKT FOR DSPIC30F 64TQFP
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

dsPIC30F6010A/6015
Most single-word instructions are executed in a single
instruction cycle, unless a conditional test is true or the
program counter is changed as a result of the instruc-
tion. In these cases, the execution takes two instruction
cycles with the additional instruction cycle(s) executed
as a NOP. Notable exceptions are the BRA (uncondi-
tional/computed branch), indirect CALL/GOTO, all table
reads and writes and RETURN/RETFIE instructions,
which are single-word instructions, but take two or
three cycles. Certain instructions that involve skipping
over the subsequent instruction, require either two or
TABLE 22-1:
DS70150C-page 164
#text
(text)
[text]
{ }
<n:m>
.b
.d
.S
.w
Acc
AWB
bit4
C, DC, N, OV, Z
Expr
f
lit1
lit4
lit5
lit8
lit10
lit14
lit16
lit23
None
OA, OB, SA, SB
PC
Slit10
Slit16
Slit6
Field
SYMBOLS USED IN OPCODE DESCRIPTIONS
Means literal defined by “text”
Means “content of “text”
Means “the location addressed by text”
Optional field or operation
Register bit field
Byte mode selection
Double Word mode selection
Shadow register select
Word mode selection (default)
One of two accumulators {A, B}
Accumulator Write-Back Destination Address register
4-bit bit selection field (used in word addressed instructions)
MCU Status bits: Carry, Digit Carry, Negative, Overflow, Zero
Absolute address, label or expression (resolved by the linker)
File register address
1-bit unsigned literal
4-bit unsigned literal
5-bit unsigned literal
8-bit unsigned literal
10-bit unsigned literal
14-bit unsigned literal
16-bit unsigned literal
23-bit unsigned literal
Field does not require an entry, may be blank
DSP Status bits: AccA Overflow, AccB Overflow, AccA Saturate, AccB Saturate
Program Counter
10-bit signed literal
16-bit signed literal
6-bit signed literal
{-16...16}
{-512...511}
{-32768...32767}
{0,1}
{0...15}
{0...31}
{0...255}
{0x0000...0x1FFF}
{0...255} for Byte mode, {0:1023} for Word mode
{0...16384}
{0...65535}
{0...8388608}; LSB must be ‘0’
three cycles if the skip is performed, depending on
whether the instruction being skipped is a single-word
or two-word instruction. Moreover, double word moves
require two cycles. The double word instructions
execute in two instruction cycles.
Note:
Description
For more details on the instruction set,
refer to the “dsPIC30F/33F Programmers
Reference Manual“ (DS70157).
© 2007 Microchip Technology Inc.
{W13, [W13]+ = 2}
{0...15}