STLM75M2E STMicroelectronics, STLM75M2E Datasheet - Page 16

• Manufacturer Part Number: STLM75M2E
• Description: IC TEMP SENSOR DIGITAL SO-8
• Manufacturer: STMicroelectronics

Specifications of STLM75M2E

• Featured Product: STM32 Cortex-M3 Companion Products
• Function: Temp Sensor, Watchdog
• Topology: ADC (Sigma Delta), Comparator, Register Bank
• Sensor Type: Internal
• Sensing Temperature: -55°C ~ 125°C
• Output Type: I²C™/SMBus™
• Output Alarm: Yes
• Output Fan: No
• Voltage - Supply: 2.7 V ~ 5.5 V
• Operating Temperature: -55°C ~ 125°C
• Mounting Type: Surface Mount
• Package / Case: 8-SOIC (0.154", 3.90mm Width)
• Full Temp Accuracy: +/- 3 C
• Digital Output - Bus Interface: Serial (2-Wire, I2C)
• Digital Output - Number Of Bits: 9 bit
• Maximum Operating Temperature: + 125 C
• Minimum Operating Temperature: - 55 C
• Ic Output Type: Digital
• Sensing Accuracy Range: ± 0.5°C
• Temperature Sensing Range: -55°C To +125°C
• Supply Current: 125µA
• Supply Voltage Range: 2.7V To 5.5V
• Sensor Case Style: SOIC
• No. Of Pins: 8
• Rohs Compliant: Yes
• For Use With: 497-10508 - BOARD EVAL FOR MEMS SENSORS497-10048 - BOARD EVAL ACCELEROMETER497-6238 - BOARD STLM75/STDS75/ST72F651
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

Functional description
3
3.1
3.1.1
16/40
Functional description
The STLM75 registers have unique pointer designations which are defined in
page
must “point” to the device register to be accessed.
All of these user-accessible registers can be accessed via the digital serial interface at
anytime (see
●
●
●
●
●
Registers and register set formats
Command/pointer register
The most significant bits (MSBs) of the command register must always be zero. Writing a '1'
into any of these bits will cause the current operation to be terminated (bit 2 through bit 7
must be kept '0', see
Table 4.
The command register retains pointer information between operations (see
Therefore, this register only needs to be updated once for consecutive READ operations
from the same register. All bits in the command register default to '0' at power-up.
MSB
Bit7
Command register/address pointer register
Configuration register
Temperature register
Overlimit signal temperature register (T
Hysteresis temperature register (T
0
17. Whenever any READ/WRITE operation to the STLM75 register is desired, the user
Command/pointer register format
Serial interface on page
Bit6
0
Table
Bit5
4).
0
Doc ID 13296 Rev 12
20), and they include:
Bit4
HYS
0
)
OS
)
Bit3
0
Bit2
0
Bit1
P1
Pointer/register
Table
select bits
Table 5 on
5).
STLM75
Bit0
LSB
P0