H7CX-A11D1-N DC12-24/AC24 Omron, H7CX-A11D1-N DC12-24/AC24 Datasheet - Page 50
![Tachometers 11-pin SPDT 6 Digits 12-24VDC/VAC24](/photos/18/6/180612/h7cx-n_sml.jpg)
H7CX-A11D1-N DC12-24/AC24
Manufacturer Part Number
H7CX-A11D1-N DC12-24/AC24
Description
Tachometers 11-pin SPDT 6 Digits 12-24VDC/VAC24
Manufacturer
Omron
Type
1 Stage and Total Preset Counterr
Specifications of H7CX-A11D1-N DC12-24/AC24
Frequency Response
50 Hz
Product
Panel Mount Tachometer
Voltage
12 VDC to 24 VDC, 24 VAC
Display Type
6 Digit
Accuracy
+/- 0.1 %
No. Of Digits / Alpha
6
Digit Height
10mm
Power Consumption
4.7W
Counting Speed
5kHz
Operating Temperature Range
-10°C To +55°C
Meter Function
Counter
Signal Input Type
PNP/NPN
Character Size
9mm
Supply Voltage Min
12VDC
Rohs Compliant
Yes
Connector Type
11-Pin Socket
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
50
H7CX-R@-N
Precautions for the H7CX-R
In upper and lower limit output mode, if the comparison value setting is such that comparison value 1 comparison value 2, the output will always
be ON.
Hold Function
The measurement value (display value) and output are sustained while the hold input is ON.
Note: The output will maintain the current status when the hold key is pressed.
Example:
* The H7CX-R11W@-N does not have a hold input.
Operation in DIP Switch Monitor Mode
The H7CX-R is also equipped with a DIP switch monitor function, a convenient function that enables the settings of the DIP switch pins to be
confirmed using the front display.
DIP Switch
Monitor
Mode
Run Mode
Output mode
Key
Lower limit
setting
Power ON
1 s min.
+
Comparison value (lower limit)
1
*
Hold input* (Hold Key)
DIP switch monitor
Display value
OUT
: Measurement stopped
: Measurement possible
1
Key
Operation
The status of the DIP switch pins (1 to 8) can be confirmed using the U Key.
* When the mode is changed to DIP switch monitor, the measurement value is reset, outputs turns OFF, and
Note: To change the mode to DIP switch monitor mode, press the
measuring stops.
OFF
ON
Example
1 2 3 4 5 6 7 8
for 1 s min. with the
if the
Actual input
1
Sustained output
Key is pressed first.
Sustained display value
Key held down. The mode will not change
…Indicates that DIP switch pin 8 is ON.
…Indicates that DIP switch pin 7 is OFF.
…Indicates that DIP switch pin 6 is ON.
…Indicates that DIP switch pin 5 is OFF.
…Indicates that DIP switch pin 4 is ON.
…Indicates that DIP switch pin 3 is OFF.
…Indicates that DIP switch pin 2 is ON.
…Indicates that DIP switch pin 1 is OFF.
1
Key