142-0407-011 Emerson Network Power, 142-0407-011 Datasheet - Page 8

• Manufacturer Part Number: 142-0407-011
• Description: RF Connectors STRT PLG 58/141 GLD
• Manufacturer: Emerson Network Power
• Type: Cable Plugr

Specifications of 142-0407-011

• Body Style: Straight
• Cable Type: RG 58/U, 141, 303
• Connector Type: Plug Crimp
• Features: Captivated contact
• Frequency Range: 0 GHz to to 12.4 GHz
• Housing Material: Brass
• Mounting Angle: Straight
• Operating Temperature Range: - 65 C to + 165 C
• Rf Series: SMA
• Product: Various Connectors
• Contact Plating: Gold
• Shell Plating: Gold
• Impedance: 50 Ohms
• Termination Style: Crimp
• Maximum Frequency: 12.4 GHz
• Angle: Straight
• Finish, Housing: Gold
• Material, Contact: Brass
• Material, Dielectric: TFE
• Material, Housing: Brass
• Primary Type: SMA
• Special Features: 3-Pc, Captivated Contact
• Termination: Crimp
• Voltage, Rating: 335 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

SMA SOLDER TYPE ANTENNA CONNECTOR
PLUG FOR FLEXIBLE OR SEMI-RIGID CABLE
FLEXIBLE CABLE
RG 178, RG 196
SEMI-RIGID
CABLE DIA.
.047 (1.19)
8
Assembly
Instructions
Johnson Components
®
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: [phone] • www.johnsoncomp.com
1. Identify connector parts. (2 piece parts)
2. Strip cable to dimensions shown. Do not nick
3. Flexible Cable Attachment: Twist stranded
center conductor or braid on flexible cable.
center conductor into tight bundle and tin (op-
tional). Slide cable into body, making sure cable
insulation bottoms on center contact and braid
fits inside stem. Solder center conductor to con-
tact through the side access ports. Use a mini-
mum amount of solder for a good joint. .020
(0.51) diameter solder is recommended. Sol-
der braid to body. Use a minimum amount of
solder to completely join the braid to the body.
Semi-Rigid Cable Attachments: Slide cable
into body making certain cable insulation bot-
toms on center contact. Solder center conduc-
tor to contact through the side access ports. Use
a minimum amount of solder for a good joint.
.020 (0.51) diameter solder is recommended.
Solder body to cable jacket. Use a minimum
amount of heat to minimize cable insulation
movement.
RG 178/u, .047 semi-rigid
CABLE GROUP
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PART NUMBER
142-0801-421
INCHES (MILLIMETERS)