142-0407-106 Emerson Network Power, 142-0407-106 Datasheet

no-image

142-0407-106

Manufacturer Part Number
142-0407-106
Description
Manufacturer
Emerson Network Power
Datasheet

Specifications of 142-0407-106

Lead Free Status / RoHS Status
Compliant
SMA 50 Ohm
Right Angle Crimp Type Plug -
Captivated Contact
Johnson Components
RG-58/U, 141, 303
CABLE
TYPE
TM
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com
1.15 + .02 f (GHz) 0-12.4 GHz
FREQ. RANGE
VSWR &
142-0407-101
PLATED
GOLD
142-0407-106
1. Identify connector parts. (3 piece parts)
2. Strip cable to dimensions shown. Do not nick braid or cen-
3. Flare braid and slide cable into body making certain that
4. Arrange braid uniformly around crimp stem. Slide crimp
NICKEL
PLATED
ter conductor. When stripping LMR-100 low loss cable,
remove foil back to where cable jacket is stripped. A wire
stripper of correct size is recommended for this step. Twist
stranded center conductor into tight bundle and tin (op-
tional). Slide crimp sleeve onto cable as shown.
the cable insulation bottoms on center contact. Solder
center conductor to contact through the rear access port.
Use a minimum amount of solder for a full fillet joint. .020
(0.51) diameter solder is recommended.
sleeve over braid and crimp securely using recommended
crimp tool. Place expansion cap in access port and seat
with .187 (4.75) diameter flat punch. Shrink heat shrink
tubing over crimp sleeve if applicable.
CABLE GROUP
RG-58/u,
141, 303
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
PART NUMBER CRIMP HEX
142-0407-101
142-0407-106
.213 (5.41)
.213 (5.41)

Related parts for 142-0407-106

142-0407-106 Summary of contents

Page 1

... Place expansion cap in access port and seat with .187 (4.75) diameter flat punch. Shrink heat shrink tubing over crimp sleeve if applicable. INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST PART NUMBER CRIMP HEX 142-0407-101 .213 (5.41) 142-0407-106 .213 (5.41) ...

Page 2

... MHz) Connectors for RG-178 ................................................................... 335 Connectors for RG-316; LMR-100, 195, 200 .................................. 500 Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid, .141 semi-rigid cable w/o contact, uncabled receptacles .............. 670 Connectors for .141 semi-rigid with contact and adapters ............ 1000 Power Rating (Dummy Load): 0.5 watt @ + 25 C, derated to 0.25 watt @ ...

Page 3

SMA - 50 Ohm Connectors Specifications Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min. Female - beryllium copper per QQ-C-530, gold ...

Related keywords