142-0407-016 Emerson Network Power, 142-0407-016 Datasheet

RF Connectors STRT PLG 58/141 Ni

142-0407-016

Manufacturer Part Number
142-0407-016
Description
RF Connectors STRT PLG 58/141 Ni
Manufacturer
Emerson Network Power
Datasheet

Specifications of 142-0407-016

Product
Connector
Rf Series
SMA
Gender
Plug
Contact Plating
Nickel
Impedance
50 Ohms
Termination Style
Crimp
Body Style
Straight
Cable Type
RG 58/U, 141, 303
Connector Type
Plug Crimp
Housing Material
Brass
Maximum Frequency
12.4 GHz
Lead Free Status / RoHS Status
Compliant
1. Identify connector parts. (3 piece parts - except bulkhead)
2. Strip cable to dimensions shown. Do not nick braid or center conductor. Tin center conductor if contact will be solder attached. Do not
3. Assemble contact onto cable as shown.
4. Flare braid and slide body assembly over contact and under braid. Then seat body assembly firmly onto contact. The cable may have
SMA 50 Ohm
Straight Crimp Type Plug (3-piece) -
Solder or Crimp Captivated Contact
Johnson Components
tin center conductor if contact is to be crimp attached. When stripping LMR-100 low loss cable, remove foil back to where cable jacket
is stripped. A wire stripper of correct size is recommended for this step. Slide heat shrink (as applicable) and crimp sleeve onto jacket
of cable.
Solder Attachment: Solder contact to center conductor through solder hole using .020 (0.51) diameter solder. Use a minimum
amount of solder for a good joint.
Crimp Attachment: Crimp contact to center conductor using Johnson Components
positioner 141-0000-907. Crimp location should be centered between end of contact and X-hole. Crimp attachment to solid center
conductor cables is not recommended.
to be held in a clamping fixture. Arrange braid uniformly around crimp stem. Slide crimp sleeve forward and crimp using recommended
crimp tool. Slide heat shrink forward and shrink (as applicable).
RG-58/U, 141, 303
CABLE
TYPE
TM
• P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com
1.15 + .01 f (GHz) 0-12.4 GHz
FREQ. RANGE
VSWR &
142-0407-011
PLATED
GOLD
142-0407-016
PLATED
NICKEL
RG-58/u, 141, 303
CABLE GROUP
TM
.706 (17.93)
Hand Tool 144-0000-910, setting #2, with
“A”
INCHES (MILLIMETERS)
CUSTOMER DRAWINGS AVAILABLE UPON REQUEST
142-0407-011/016
PART NUMBER
CRIMP HEX
.213 (5.41)

Related parts for 142-0407-016

142-0407-016 Summary of contents

Page 1

... P.O. Box 1732 • Waseca, MN 56093-0832 • 1-800-247-8256 • Fax: 507-833-6287 • www.johnsoncomponents.com GOLD NICKEL “A” PLATED PLATED .706 (17.93) 142-0407-011 142-0407-016 CABLE GROUP RG-58/u, 141, 303 TM Hand Tool 144-0000-910, setting #2, with INCHES (MILLIMETERS) CUSTOMER DRAWINGS AVAILABLE UPON REQUEST PART NUMBER ...

Page 2

... MHz) Connectors for RG-178 ................................................................... 335 Connectors for RG-316; LMR-100, 195, 200 .................................. 500 Connectors for RG-58, RG-142, LMR-240, .086 semi-rigid, .141 semi-rigid cable w/o contact, uncabled receptacles .............. 670 Connectors for .141 semi-rigid with contact and adapters ............ 1000 Power Rating (Dummy Load): 0.5 watt @ + 25 C, derated to 0.25 watt @ ...

Page 3

SMA - 50 Ohm Connectors Specifications Bodies: Brass per QQ-B-626, gold plated* per MIL-G-45204 .00001" min. or nickel plated per QQ-N-290 Contacts: Male - brass per QQ-B-626, gold plated per MIL-G-45204 .00003" min. Female - beryllium copper per QQ-C-530, gold ...

Related keywords