AVR-ISP500-TINY Olimex Ltd., AVR-ISP500-TINY Datasheet - Page 11

• Manufacturer Part Number: AVR-ISP500-TINY
• Description: Programmers & Debuggers AVR PROGRAMMER 2MB FLASH
• Manufacturer: Olimex Ltd.

Specifications of AVR-ISP500-TINY

• Positions/sockets: 1
• Description/function: USB AVR Programmer
• Tool Type: Programmer
• Core Architecture: AVR
• Ic Product Type: Programmer, In-Circuit
• Supported Families: AVR, MegaAVR, TinyAVR
• Ic Interface Type: USB
• Rohs Compliant: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With/related Products: AVR Studio
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 1701517 25R4412

In case of autonomous operation error, the RED LED will blink for a while.
The number of flashes indicates the error that caused the failure. Error
codes are given in the table below.
Example:
CAVEAT:
is that the programmer has no way to distinguish RC value writes to FLASH
from normal data ones.
TIP:
corresponding tabs are selected. This, however, will be recorded by the
programmer if it is in command logging state. So for best results it is
recommended to issue all commands in a predefined order. This is achieved
LED1
LED0
Sometimes AvrStudio will issue FUSE/LOCK reads when the
RC calibration in autonomous mode is not supported. The reason
idle
1Enter
programming
mode.
1Signature
read
mismatch.
2FLASH read
mismatch.
2EEPROM
read
mismatch.
2FUSE read
mismatch
2LOCK read
mismatch
3Corrupted
log
3Empty log
4Other
command/ans
wer error.
flashesAction
Number of
that failed
ISP
RED
Error code: 2 flashes –
mem read mismatch
End of error code. LED0
lights constantly.
idle
t
t